SURFACE PRODUCTION OPERATION

OBJECTIVES

After completion of this course, the participants will be able and capable to :

• Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application.
• Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling processes.
• Analyze the production potential of reservoir under with actual handling system processes and to plan the better development processes according to reservoir capacity.
• Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil and gas handling processes.

PARTICIPANTS

No specified  (Operator/Sr. Operator/Engineer or Non Engineer)

OUTLINE

1.      Gas Surface Production Operation and Equipments

• Introduction to Gas Handling and Facilities

1. Gas Properties
2. Ideal gas
3. Real Gas
4. Gas Formation Volume Factor
5. Gas Compressibility
6. Gas-Water System
7. Gas-Condensate System
8. Gas Reservioir Performance

• Reservoir Gas Flow
• Gas Reserves
• Well Completion Effect
• Tight Gas Well
• Gas Well Testing
• Gas Piping System

1. Basic Flow Equation
2. Flow in Wells and Flow in Pipelines
3. Effect of Liquids
4. Use of Pressure Traverse Curve
5. Liquid Removal from Gas Wells

• Gas Compression

1. Type of Compressors
2. Compressor Design
3. Centrifugal Compressor

• Total System Analysis

1. Tubing and Flow Line Effect
2. Separator Pressure Effect
3. Compressor Selection

• Flow Measuring

1. Orifice Metering
2. Metering System Design
3. Other Metering Methods

• Gas Condensate Reservoir

1. Well Testing and Sampling
2. Gas Cycling

• Field Operation Problems

1. Pressure Cumulative Production Plot
2. Hydrate Formation
3. Sour Gas Production
4. Corrosion Control With Inhibitors
5. Sulfur Deposition

• Gas Processing

1. Field treatment of Natural Gas
2. Gas Plant Operation
3. Gas Dehydration
4. Gas Sweetening

 2.      Oil Surface Production Operation and Equipments

• Oil Well Surface Production Equipment and Operation

1. Oil Well Equipment
2. Oil Well Production Operation

• Well Automatic Safety Device
• Oil Gathering System. Manifold and Flowline

1. Oil Gath ring System
2. Manifold e System
3. Flowline Sizing and Design

• Crude Oil and Gas Separation

1. Separator and Principle of Separation
2. Design of Separator
3. Oil Dehydration

• Principles of Measurement

1. Introduction to Measurement
2. Crude Oil Measurement
3. Gas Measurement

• Well Test

1. Introduction
2. Responsibility for Test
3. Preparation for Test
4. Types of Well Test
5. Equipment and Procedures
6. Accuracy of Fluid Measurement
7. Problem in Testing
8. Type of Test

• Artificial Lift Methods

1. Gas Lift
2. Submersible Pump
3. Succker Rod Pump
4. Hydraulic Pump

 3.      Cases study and discussion

INSTRUCTOR

Miftakhul Hudha, S.T., M.Eng and Team