Category event

Home / News / event

  • ELECTRICAL ENGINEERING

    22 Agust 2022
    Course Title : ELECTRICAL ENGINEERING Date           : 13 – 15 September 2022 Place          : Prime Plaza Hotel Jogjakarta ( 4 star hotel) COURSE CONTENT Introduction applied Electrical Engineering in Oil & Gas industries Electrical Engineering With Electric Circuits           - Basic Electricity, Ohm’s Law and Circuit ... More

  • Value Improving Practices ( VIPs)

    22 Agust 2022
    Course Title : Value Improving Practices ( VIPs) Date           : 29 Agustus – 02 September Place          : Prime Plaza Hotel Jogjakarta ( 4 star hotel) COURSE OBJECTIVES Setting Business Priorities Design to Capacity Technology Selection Waste Management Constructability PARTICIPANTS This training is recommended to be followed by: Project & Technical Engineer lead ... More

  • SEISMIC RESERVOIR CHARACTERIZATION

    22 Agust 2022
    Course Title  : SEISMIC RESERVOIR CHARACTERIZATION Date            : 22 - 24 August 2022 Place           : Prime Plaza Hotel Jogjakarta (4 star hotel) COURSE OBJECTIVES Provide a practical introduction to techniques and workflows combining geostatistics and rock physics for the construction of seismic-constrained earth models; Explain how to integrate quantitatively seismic and ... More

  • TOTAL PRODUCTIVE MAINTENANCE (TPM)

    16 Nov 2021
    SCHEDULE : 29-30 NOVEMBER  DURATION : 3 DAYS   TRAINING OBJECTIVES : After completion of this training, participants will: a. understanding to system and maintenance management concept b. understanding to equipment failure c. understanding to maintainability and statistic application d. understanding to total productive maintenance e. understanding to spare parts support factor and ... More

  • CONSTRUCTION & MAINTENANCE SAFETY PRACTICE

    08 Nov 2021
    SHEDULE : 22-23 NOVEMBER  DURATION : 3 DAYS   OBJECTIVE This training aims to assist the employees of the construction industry to prepare for the mandatory basic safety training courses and enables them to grasp the key knowledge in occupational safety.   COURSE CONTENT 1. General Safety 2. Work at Height 3. Use of Personal Protective Equipment 4. Fire Safety 5. Machine Safety 6. Electricity Safety 7. Safety of Confined ... More

  • RINTISAN BISNIS

    08 Nov 2021
    SCHEDULE : 22-23 NOVEMBER DURATION : 3 DAYS   DESCRIPTION OF SEMINAR: Seminar ini akan memberikan pemahaman dan wawasan, serta contoh-contoh kepada dosen-dosen penggerak kegiatan MBKM (Merdeka Belajar Kampus Merdeka) & mahasiswa di kampus ITNY, tentang bagaimana memulai wirausaha atau rintisan bisnis, melihat peluang bisnis, membangun produk dan produksi, pemasaran dan media pemasaran, merek dan legal, manajemen bisnis dan keuangan, hingga ke membangun sebuah rintisan ... More

  • RISK MANAGEMENT IN PRODUCTION SURFACE FACILITY

    28 Sept 2021
    SCHADULE : 11-14 OKTOBER 2021 DURATION : 3 DAYS   OBJECTIVES This course is designed to provide participants with a complete overview of Oil and Gas Production and to provide a comprehensive understanding of risk Management until evaluation to handle in production surface facilities . It will be delivered in order to meet the needs of non-technical personnel, and go into detail of technical personnel’s daily in-field operation, safety and maintenance. Technical and ... More

  • ROTATING EQUIPMENTS OPERATION, MAINTENANCE

    20 Agust 2021
    SCHADULE : 20-22 SEPTEMBER   COURSE INTRODUCTION Most of plant's equipments are rotary. Therefore, understanding the principles of rotating equipments is very essential. Identification of failure modes and monitoring methods of failure symptom are important as well, for establishing the most effective maintenance program. This course begins with discussing the definition of rotating equipments, their types and their primary functions, as well as the general characteristics of ... More

  • POWER SYSTEM ANALYSIS

    09 Agust 2021
    SCHEDULE : 13-15 SEPTEMBER   COURSE OVERVIEW This training course covers the essential elements of power system analysis, both from a theoretical and practical viewpoint. Modeling of power system and simulation are essential for understanding the system operation and response. Studying faults analysis and model are essential to recommend the continuity of supplying power. Understanding types of faults and expecting their locations are important to avoid lack of supplying ... More

  • KTL PEMELIHARAAN POMPA DAN KOMPRESOR

    09 Agust 2021
    SCHEDULE : 06-08 SEPTEMBER   DESKRIPSIPompa dan Kompresor (Pump and Compressor) dalam proses operasi industri memiliki peranan yang sangat penting. Pompa dan kompresor memiliki karakteristik khusus untuk melayani pekerjaan-pekerjaan tertentu. Untuk menanganinya, dibutuhkan kompetensi khusus untuk dapat memilih dan memutuskan pompa dan kompresor mana yang benar-benar sesuai dengan pekerjaan yang dihadapi sehingga hasilnya bisa optimal. Kesalahan memilih type dan kapasitas pompa ... More

  • CORROSION AND SCALING PREVENTION

    09 Agust 2021
    SCHADULE : 23-25 AGUSTUS     OBJECTIVES By attending this course, participants are able to broaden or reshape their knowledge on the related subjects of his or her area of responsibility, learn more detail about corrosion and scaling mechanism, know more how to prevent corrosion and scaling, understand how to select and use chemicals, discuss and consult their specific problems they are about to bring to the class, and share experiences with others. After completion of ... More

  • HAZARDOUS CHEMICAL HANDLING

    15 Juni 2021
    SCHEDULE : 05-06 JULY   OBJECTIVE Upon completing this course, participant will gain skill in safe handling of hazardous chemicals and develop their ability to identify hazards of chemicals and how to act correctly either in handling or in transporting those stuffs. Also they will be able to develop an emergency response plan if any undesired event occurs with those hazardous chemicals injuries and illness and damage to property could be minimized.   COURSE ... More

  • OIL & GAS PROCESSING PLANTS, DESIGN & OPERATIONS

    27 Mei 2021
    SCCHADULE : 21-22 JUNE   DESCRIPTION This training aims to provide knowledge and understanding of the design and operation of oil and gas processing plant. Training will begin with a discussion of the nature and characteristics of the hydrocarbon as a main constituent component of the oil and gas. Next will be an overview of the process or operation used in oil and gas processing. Based on the knowledge and understanding of the nature and characteristics of the oil / gas and ... More

  • MULTI – PHASE FLOW METER

    27 Mei 2021
    SCHADULE : 14-15 JUNE   DESKRIPSI   In a process, flow measurement is a very important tool for controlling that process. The basics of flow measurement and how to convert physical quantities to electricity are discussed in this course. Thus participants understand how flow measurement works, how to calibrate and how to maintain.   OUTCOMES Each audience will understand how density and viscosity affect liquid flow meters. Each audience will also know how to ... More

  • EFFECTIVE AND EFFICIENT OF MAINTENANCE MANAGEMENT

    03 Mei 2021
    SCHEDULE : 14-15 JUNI     BACKGROUND As the requirements for improved productivity and cost effectiveness increase, combined with an increased attention to safety and environmental issues, maintenance activities play an important role. Modern maintenance management techniques will give a significant contribution to a company’s productivity by applying support to reliability based techniques and cost-benefit analysis for maintenance optimization. Several companies ... More

  • CHOKE AND CONTROL VALVE

    03 Mei 2021
    SCHEDULE :02-JUNI-03 JUNI     DESCRIPTION This course is a practical knowledge of selection, installation of choke and control valves. Design, specification and implementation of control and operation in gas plant process   COURSE CONTENT Basic physical properties Fundamental of measurement Fundamentals of flow characteristics Control valves Pressure drop Flow equations Fundamental valve sizing Introduction Definition of a Control Valve Energy ... More

  • PUMPS, COMPRESSORS AND DRIVERS (ONLINE/OFFLINE)

    03 Mei 2021
    SCHEDULE : 07-08 JUNI   What You Will Learn   Develop a "feel" for the important parameters in designing, selecting, specifying, installing, operating and maintaining pumps, compressors and drivers Understand the difference between suction head, suction lift and total dynamic head How to develop system head vs. capacity curves How to develop pump performance curves for series and parallel operation How to specify the materials and details of ... More

  • CREATIVE & INNOVATIVE THINKING (ONLINE/OFFLINE)

    14 Apr 2021
    SCHEDULE : 07-08 JUNI     OVERVIEW: Budaya Kreatif sangat perlu bagi sebuah perusahaan ataupun organisasi. Banyak perusahaan yang gulung tikar karena kurangnya kreatifitas dan inovasi didalamnya. Sekarang bukan lagi perusahaan yang besar yang dapat bertahan, tapi perusahaan yang kreatif dan inovatif dan bergerak cepat. Setiap orang dalam perusahaan harus diarahkna kesana, mereka ikut terbeban dalam membangun perusahaaan. Kata-kata, “tidak tau pak, tidak mungkin pak, ... More

  • MS OFFICE AND EFFECTIVE PRESENTATION (ONLINE/OFFLINE)

    14 Apr 2021
    SCHEDULE : 02-04 JUNI     TUJUAN TRAINING : Setelah mengikuti Paket pendidikan dan pelatihan ini diharapkan para peserta mampu: 1. Mampu menggunakan aplikasi program komputer untuk pengetikan surat, laporan, dan sebagainya 2. Mampu menggunakan aplikasi program komputer untuk membuat spreadsheet 3. Mampu menggunakan aplikasi program komputer untuk pengelolaan database dan e mail 4. Mampu menggunakan aplikasi program komputer untuk presentasi METODE TRAINING : Metode pada ... More

  • TRAINING LIQUEFIED NATURAL GAS (ONLINE/OFFLINE)

    08 Apr 2021
    SCHEDULE : 18-19 MEI     Liquefied Natural Gas (LNG) sebagai salah satu alternatif transportasi gas alam telah berkembang menjadi industri yang cukup matan dan bernilai ekonomi tinggi. Industri ini memiliki beberapa tingkat rantai nilai yaitu eksplorasi dan produksi, pencairan, transportasi, serta penyimpanan dan regasifikasi. Bisnis LNG mengalami perubahan yang sangat dinamis dan kritikal seiring dengan perkembangan suplai dan permintaan energi dunia yang meningkat ... More

  • TRAINING AIR CONDITIONING ENGINEER (ONLINE/OFFLINE)

    07 Apr 2021
    SCHEDULE : 10-11 MEI     Deskripsi Sebagai seorang teknisi maupun engineering di perusahaan dituntut untuk memiliki pengetahuan tentang prinsip kerja, kontruksi dan komponen serta mengetahui cara pemeliharaan dan perawatan, pemeriksaan  dan penggantian beberapa komponennya yang sesuai dengan prosedur yang benar  dan standar  kesehatan dan keselamatan kerja. Unjuk kerja system AC yang sesuai dengan standar dan kebutuhan akan menjamin kelangsungan dan ... More

  • TRAINING ADVANCED STRATEGIC MAINTENANCE MANAGEMENT (ONLINE/OFFLINE)

    07 Apr 2021
    SCHEDULE :03-04 MEI   Dalam perkembangan organisasi industri yang berkembang jauh dari reaktif manajemen ke prediktif dan produktif manajemen merupakan sebuah proses evolusi yang memerlukan tindakan yang terencana dan terprogram dengan baik, yang berkaitan dengan tindakan sbb: 1.Mengidentifikasi perencanaan praktik terbaik dan elemen kunci untuk mengambil tindakan yang tepat; 2.Memahami bagaimana organisasi kelas dunia memecahkan masalah perencanaan umum; 3.Mengevaluasi praktek ... More

  • TRAINING ATTITUDES FOR SERVICE (ONLINE/OFFLINE)

    07 Apr 2021
    SCHEDULE : 29-30 APRIL   Deskripsi Sudah banyak perusahaan yang memahami bahwa pelayanan unggul sebagai benih unggul untuk menghasilkan hasil yang maksimal. Jadi, sekarang ini, ada kesadaran untuk fokus kepada diri sendiri, dan tidak lagi terlalu fokus kepada gerak dan langkah para pesaing. Perusahaan-perusahaan yang cerdas pemasaran, sekarang memiliki strategi untuk menciptakan keunggulan di dalam internal organisasi mereka, serta keunggulan untuk terhubung dengan para ... More

  • TRAINING AUDIT REPORT WRITING (ONLINE/OFFLINE)

    07 Apr 2021
    SCHEDULE : 26-27 April   DESKRIPSI Training Audit Report Writing ini akan mengajarkan keterampilan yang diperlukan untuk menulis sebuah laporan audit yang efektif yang akan menjadi acuan pengambilan keputusan manajemen. Anda akan belajar praktek-praktek terbaik dan tren saat ini khusus untuk pelaporan pengauditan (audit engagement). Peserta harus membawa “bahan baku” untuk satu atau lebih pengamatan audit yang signifikan untuk mendapatkan manfaat maksimum. Latihan ... More

  • PRIMAVERA P6 (SCHEDULING & CONTROLLING PROJECT)

    13 Okt 2020
    SCHEDULE : 16-18 NOVEMBER 2020 PLACE       : ONLINE DURATION : 3 DAYS   DESKRIPSI Primavera (P6) merupakan program yang handal digunakan dalam proyek konstruksi. Program ini akan mempermudah proses pengelolaan dan pengendalian pelaksanaan proyek konstruksi mulai dari tahap merancang proyek, membangun jaringan, dan mengelola data secara mudah dan cepat. Primavera merupakan sebuah perangkat lunak yang hadir untuk menjawab kebutuhan tersebut di ... More

  • MANAGEMENT KANTOR

    13 Okt 2020
    SCHEDULE : 09-11 NOVEMBER 2020 PLACE       : ONLINE DURATION : 3 DAYS   DESKRIPSI Manajemen kantor merupakan suatu proses kegiatan mengelola dan mengatur segala sesuatu yang berhubungan langsung maupun tidak langsung dengan kegiatan pimpinan dalam rangka kelancaran pelaksanaan perkantoran atau organisasi, serta memelihara dokumentasi perusahaan atau organisasi yang berguna untuk kelancaran pelaksanaan fungsi manajemen (planning, ... More

  • ELECTRICAL POWER SYSTEM ANALYSIS

    13 Okt 2020
    SCHEDULE :02-04 NOVEMBER 2020 PLACE        : ONLINE DURATION : 3 DAYS   COURSE OBJECTIVES Power System Analysis means verifying the adequacy of the power distribution system and its components. Recognize coordination related disturbances and outages. Collect the required data to perform a detailed coordination study. Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC ... More

  • PREVENTIVE PREDICTIVE MAINTENANCE MANAGEMENT

    28 Juli 2020
    SCHEDULE : 24-26 AGUSTUS PLACE       : YOGYAKARTA DURATION : 3 DAYS   DESCRIPTION This course is designed for maintenance supervisors, managers, PM leads, CMMS managers, planners, engineers and people who are training for these positions. PM techs can also benefit from this training. Also welcome are representatives from operations (particularly production control) for their perspective and input.    OBJECTIVE Our ... More

  • LIFE CYCLE ASSESSMENT (LCA)

    28 Juli 2020
    SCHEDULE : 10-12 AGUSTUS 2020 PLACE       : YOGYAKARTA DURATION : 3 DAYS   DESKRIPSI Penerapan penilaian daur hidup (LCA) ini bertujuan untuk mengidentifikasi, menghitung keberlanjutan penggunaan sumber daya alam, pembuangan pada lingkungan serta mengevaluasi dan menerapkan kemungkinan perbaikan lingkungan. Life Cycle Assessment  merujuk pada standar ISO 14040: 2006 yang telah diadopsi menjadi SNI ISO 14040:2016 serta ISO 14044:2006 atau ... More

  • ELECTRICAL POWER SYSTEM ANALYSIS

    28 Juli 2020
    SCHEDULE : 04-06 AGUSTUS 2020 PLACE       : YOGYAKARTA DURATION : 3 DAYS   COURSE OBJECTIVES Power System Analysis means verifying the adequacy of the power distribution system and its components. Recognize coordination related disturbances and outages. Collect the required data to perform a detailed coordination study. Derive complete protective device settings for some of the simpler electrical power systems that are consistent with NEC ... More

  • SAFETY INSTRUMENT SYSTEM & CONTROL

    07 Juli 2020
    SCHEDULE : 13-15 JULI PLACE       : YOGYAKARTA DURATION : 3 DAYS   DESCRIPTION             The operation of many industrial processes involves inherent risks due to the presence of dangerous material like gases and chemicals. Safety Instrumented Systems SIS are specifically designed to protect personnel, equipment and the environment by reducing the likelihood (frequency) or the impact ... More

  • TRANSPORT OPERATION & MANAGEMENT [TRAINING ONLINE]

    30 Apr 2020
    SCHEDULE     : 20-22 JUNI 2020 PLACE           : YOGYAKARTA DURATION     : 3 DAYS     INTRODUCTION : Pelatihan ini diperuntukkan bagi para praktisi, supervisor, manajer yang bergerak di bidang transportasi, pengadaan dan pendistribusian. Memberikan pengetahuan dan keterampilan tentang cara-cara memanajemeni transportasi secara optimal, mulai dari sistem transportasi, lokasi industri dan model transportasinya, ... More

  • BASIC LAND SURVEYING [TRAINING ONLINE]

    30 Apr 2020
    SCHEDULE      : 16-18 JUNI PLACE            : PEKANBARU DURATION      : 3 DAYS     DESCRIPTION The course covers levelling and total station instrument use and adjustment, misclose distribution, Angle-Bearing-Angle conversion and revision of trigonometry concepts. Introduction to coordinates and explanation of the common survey computations for close and area are also covered. COURSE ... More

  • PRODUCTION SHARING CONTRACT BUDGETING, REPORTING, & AUDIT FOR OIL & GAS INDUSTRY [TRAINING O

    30 Apr 2020
    SCHEDULE      : 15-17 JUNI 2020 PLACE             : YOGYAKARTA DURATION       : 3 DAYS     DESCRIPTION   This course is designed to give participant understanding and better pictures as to how the PSC (Production Sharing Contract) for Petroleum (oil and gas) industry applied in Indonesia. A budgeting process and control is more than a row of numbers. It is a tool for establishing priorities of ... More

  • INTERMEDIATE MICROSOFT OFFICE

    30 Apr 2020
    SCHEDULE    : 15-17 JUNI 2020 PLACE          : JAKARTA DURATION    : 3 DAYS     DESCRIPTION Do you need to take your Microsoft Office skills to the next level? This course is ideal if you have completed an Introduction to Microsoft Office course or have had previous experience with Microsoft Office but wish to expand your skills and knowledge. Whether it be for personal or work use, our Intermediate Microsoft Office course ... More

  • KTL PEMELIHARAAN POMPA DAN KOMPRESOR

    30 Apr 2020
    SCHEDULE    : 10-12 JUNI 2020 PLACE          : BANDUNG DURATION    : 3 DAYS     DESKRIPSIPompa dan Kompresor (Pump and Compressor) dalam proses operasi industri memiliki peranan yang sangat penting. Pompa dan kompresor memiliki karakteristik khusus untuk melayani pekerjaan-pekerjaan tertentu. Untuk menanganinya, dibutuhkan kompetensi khusus untuk dapat memilih dan memutuskan pompa dan kompresor mana yang benar-benar sesuai ... More

  • MANAGEMENT ACCOUNTING

    30 Apr 2020
    SCHEDULE     : 09-11 JUNI 2020 PLACE           : PEKANBARU DURATION     : 3 DAYS     DESKRIPSI Pelatihan Akuntansi Manajemen  ini akan memberikan banyak  pengetahuan kepada peserta tentang bagaimana cara membangun berbagai teknik dan metode pengambilan keputusan terutama yang berkaitan dengan pengelolaan dan manajemen di bidang akuntansi. Sehingga dengan manajemen yang baik akan memperoleh manfaat ... More

  • TURBO MACHINERY MONITORING AND PROBLEM ANALYSIS

    30 Apr 2020
    SCHEDULE     : 08-10 JUNI 2020 PLACE            :  JAKARTA DURATION     : 3 DAYS     DESCRIPTION This training intermediate level program for experienced mechanical equipment engineers to develop and expand their capabilities in monitoring and problem analysis of turbomachinery. This course focuses on defining the systems and subsystems that form the turbomachinery, the potential problems with these ... More

  • EFFLUENT PRODUCED WASTEWATER

    30 Apr 2020
    SCHEDULE     : 08-10 JUNI 2020 PLACE           : SURABAYA DURATION     : 3 DAYS     OBJECTIVE Upon completion, the participant should be able to: Define and implement cleaner production activities, industrial water management strategies for pollution and toxicity prevention Define the most commonly applied wastewater treatment technologies and explain their most suitable industrial waste treatment ... More

  • BASIC ELECTRIC MOTOR DIAGNOSTIC

    30 Apr 2020
    SCHEDULE       : 03-05 JUNI 2020 PLACE              : BANDUNG DURATION        : 3 DAYS     DESCRIPTION The Electrical Motor Diagnostics course includes a robust review of energized and de-energized testing of electric motors including hands-on motor circuit analysis and electrical signature analysis. All Electrical Motor Diagnostics classes are able to be held at your ... More

  • MAINTENANCE MANAGEMENT (PDM & PM)

    30 Apr 2020
    SCHEDULE    : 02-04 JUNI 2020 PLACE           : YOGYAKARTA DURATION     : 3 DAYS     INTRODUCTION Preventive maintenance (PM) is a schedule of planned maintenance actions aimed at the prevention of breakdowns and failures. The goal of preventive maintenance is to prevent the failure of equipment before it actually occurs. It is designed to preserve and enhance equipment reliability by replacing worn components ... More

  • OIL AND EMULSION TREATING PROCESS

    30 Apr 2020
    SCHEDULE     : 01-03 JUNI 2020 PLACE           : YOGYAKARTA DURATION     : 3 DAYS   DESCRIPTION Oil wells generally, produce a mixture of hydrocarbon oil, water, gas, and even sand or solid materiel with dissolved minerals usually including a large amount of salt & other gases like hydrogen sulfide (H2S); and solids, including sand from the reservoir, dirt, scale, and corrosion products from the tubing. Foreign ... More

  • WASTE WATER TREATMENT PROCESS OPERATION

    18 Mar 2020
    SCHEDULE :27-29 APRIL PLACE       : BANDUNG DURATION : 3 DYAS     INTRODUCTION: The waste procedure is responsible for contamination arising from waste, and there is specific legislation relating to environmental management and waste management, and hazardous waste management. Waste disposal is potentially a major source of legal liability, particularly in Indonesia where there is strict liability for environmental damage resulting from ... More

  • TRANSFORMER MAINTENANCE & OPERATION

    18 Mar 2020
    SCHEDULE :20-22 APRIL PLACE       : YOGYAKARTA DURATION : 3 DYAS     DESCRIPTION                 Installation of high voltage distribution and transmission equipment has increased significantly over the years due to ongoing global demand for power. As a result, the need to ensure the reliability of operation of power systems is paramount. Power transformers are ... More

  • PROCESS CONTROL AND INSTRUMENTATION

    18 Mar 2020
    SCHEDULE : 13-15 APRIL PLACE       : BANDUNG DURATION : 3 DAYS   DESCRIPTION Nowadays measurement, instrumentation and process engineers and specialists in technology industries are highly in demand for calibration, inspection, and cost reduction to identify and adopt new measurement technology for improving the operation. With that in mind, the individual must be a qualified person to be able to work on the equipments to avoid the hazards ... More

  • MENTORING SKILLS

    16 Mar 2020
    SCHEDULE : 18-20 MARET PLACE       : BANDUNG DURATION : 3 DAYS   DESCRIPTION The aim of this session is to give delegates information and tips for developing and managing the mentor/mentee relationship. As organisations look for different ways to develop the skills of their people, mentoring is becoming a much used method and this workshop focuses on the skills and approaches necessary to become an effective mentor. By the end of the workshop, ... More

  • PIPELINE PIGGING OPERATION

    16 Mar 2020
    SCHEDULE : 18-20 MARET PLACE       : BANDUNG DURATION :M3 DAYS   INTRODUCTION  Pigging is not just about high-level inspection; rather, the basics of pipeline design and of utility pigging to accommodate the most mundane tasks, are in the long term probably even more important.   TRAINING OBJECTIVE After the course participant will : Have a good aknowledge of pigging technology Pigging operation and time calculation   TRAINING ... More

  • ELECTRICAL GROUNDING & LIGHTNING PROTECTION

    16 Mar 2020
    SCHEDULE : 17-19 MARET PLACE       : MALANG DURATION : 3 DAYS   DESCRIPTION v  This advanced course will also address other grounding electrode systems not covered in the basic electrical grounding course such as “Buried Horizontal Ground Grids”, the “Three-Point” triangular electrode and calculations for determining the area of influence of grounding electrodes, such as a ground rod. v  The course will also ... More

  • PRODUCTION HANDLING, SEPARATION FACILITIES AND MEASUREMENT

    04 Mar 2020
    SCHEDULE : 10-12 MARET 2020 PLACE       : SURABAYA DURATION : 3 DAYS   OBJECTIVES Peserta diharapkan dapat memperoleh gambaran secara menyeluruh mengenai cara pengelolaan, separasi, operasi, pengukuran produksi sumur, administrasi dan laporan produksi, serta mampu melaksanakan penyusunan laporan produksi harian, mingguan, atau bulanan. COURSE CONTENT Aliran Fluida Produksi Sumur. Cara pemisahan produksi minyak, gas, dan air Peralatan ... More

  • EFFECTIVE AND EFFICIENT OF MAINTENANCE MANAGEMENT

    04 Mar 2020
    SCHEDULE : 09-11 MARET 2020 PLACE       : YOGYAKARTA DURATION : 3 DAYS   BACKGROUND As the requirements for improved productivity and cost effectiveness increase, combined with an increased attention to safety and environmental issues, maintenance activities play an important role. Modern maintenance management techniques will give a significant contribution to a company’s productivity by applying support to reliability based techniques ... More

  • INDUSTRIAL FLOW MEASUREMENT ENGINEERING

    27 Feb 2020
    SCHEDULE : 03-05 MARET 2020 PLACE       : YOGYAKARTA DURATION : 3 DAYS     DESCRIPTION   In a process, flow measurement is a very important tool for controlling that process. The basics of flow measurement and how to convert physical quantities to electricity are discussed in this course. Thus participants understand how flow measurement works, how to calibrate and how to maintain.   OUTCOMES Each audience will understand ... More

  • MAINTENANCE MANAGEMENT (PDM & PM)

    27 Feb 2020
    SCHEDULE : 02-04 MARET 2020 PLACE       : BANDUNG DURATION : 3 DAYS     INTRODUCTION Preventive maintenance (PM) is a schedule of planned maintenance actions aimed at the prevention of breakdowns and failures. The goal of preventive maintenance is to prevent the failure of equipment before it actually occurs. It is designed to preserve and enhance equipment reliability by replacing worn components before they actually fail. Preventive ... More

  • ADVANCED DISTRIBUTED CONTROL SYSTEM

    27 Feb 2020
    SCHEDULE : 02-04 MARET 2020 PLACE       : YOGYAKARTA DURATION : 3 DAYS     INTRODUCTION DCS is controller utility used  to control process in plant floor. All of process variables can be monitored and visualized throught monitor and can be supervisory control to process throught this Human Interface system by operator. For being familiarized and skilled in this field of work for operators, they should be trained how to operate this ... More

  • ADVANCED SAFETY SHUTDOWN SYSTEM

    24 Feb 2020
    SCHEDULE : 25-27 FEBRUARI 2020 PLACE       : JAKARTA DURATION : 3 DAYS   DESCRIPTION This course will provide the participants with the knowledge necessary to gain and enhance their operational aptitude in the area of safety systems.  It will cover  the operation and basic hardware of Safety Instrumented Systems (SIS), Total Plant Shutdown Systems (TPS), Emergency Shutdown Systems (ESD), Process Shutdown Systems (PSD), and Unit ... More

  • PREVENTIVE PREDICTIVE MAINTENANCE MANAGEMENT

    24 Feb 2020
    SCHEDULE ; 25-27 FABERUARI 2020 PLACE       : YOGYAKARTA DURATION : 3 DAYS   TRAINING DESCRIPTION This course is designed for maintenance supervisors, managers, PM leads, CMMS managers, planners, engineers and people who are training for these positions. PM techs can also benefit from this training. Also welcome are representatives from operations (particularly production control) for their perspective and ... More

  • FINANCIAL AND NON FINANCIAL RISK MANAGEMENT

    24 Feb 2020
    SCHEDULE : 25-27 FEBRUARI 2020 PLACE       : YOGYAKARTA DURATION : 3 ... More

  • RECIPROCATING GAS COMPRESSORS

    17 Feb 2020
    SCHEDULE : 22-14 FEBRUARI PLACE       : YOGYAKARTA DURATION :3 DAYS     OUTCOMES This course is designed for both technical professionals and field staff and will provide participants with a detailed understanding of the natural gas compression process, reciprocating compressor components and hardware as well as practical operating guidelines to optimize production and minimize downtime on natural gas compressors. Other topics include ... More

  • DRILLING OPTIMIZATION AND WELL ANALYSIS

    17 Feb 2020
    SCHEDULE : 20-22 FEBRUARI PLACE       : SURABAYA DURATION : 3 DAYS     DESCRIPTION Optimalization of process of making a circular hole with a drill or other cutting tool, for purposes such as blasting, exploration, prospecting, valuation, or obtaining oil, gas, and water. This course would be ecpected for participants to know and recognize about drilling optimilization and well planning analysis.   OBJECTIVES Detailed well planning ... More

  • HAZARDOUS WASTE MANAGEMENT

    10 Feb 2020
    SCHEDULE:  19--21 FEBRUARI 2020 PLACE      :  SURABAYA DURATION:  3 DAYS   INTRODUCTION: The waste procedure is responsible for contamination arising from waste, and there is specific legislation relating to environmental management and waste management, and hazardous waste management. Waste disposal is potentially a major source of legal liability, particularly in Indonesia where there is strict liability for environmental damage ... More

  • FINANCIAL MODELLING

    10 Feb 2020
    SCHEDULE:  18--20 FEBRUARI 2020 PLACE      :  YOGYAKARTA DURATION:  3 DAYS   INTRODUCTION Unlike most of the other businesses, all finance professionals have to continuously work with large amount of numbers. Almost everyone uses MS Excel to create financial models to analyse and project financial statements. A mastery over financial modeling will give all the professionals an edge over others as they can do their work faster and with ... More

  • ELECTRICAL POWER SYSTEM ANALYSIS

    10 Feb 2020
    SCHEDULE:  17--19 FEBRUARI 2020 PLACE      :  MALANG DURATION:  3 DAYS   COURSE OBJECTIVES Power System Analysis means verifying the adequacy of the power distribution system and its components. Recognize coordination related disturbances and outages. Collect the required data to perform a detailed coordination study. Derive complete protective device settings for some of the simpler electrical power systems that are consistent ... More

  • MACHINERY DIAGNOSTIC

    05 Feb 2020
    SVHEDULE   :10-12 FEBRUARI PLACE         : SURABAYA DURATION   : 3 DAYS   DESKRIPSI Peoplewill learn to read and interpret vibration data plots and to recognize common rotating machinery malfunctions. Students will develop these abilities by gaining understanding of the fundamental principles that govern rotating machinery vibration. Application of these principles will enable students to understand the basic root ... More

  • BEARING AND LUBRICATION ANALYSIS

    05 Feb 2020
    SCHEDULE   : 10-12 FEBRUARI PLACE          : BANDUNG DURATION    : 3 DAYS   BENEFIT : At the end of this programme, the participants are expected to: v  Better understanding of bearing and lubrication system and enable to modify lubrication supply system and construction to avoid repeating failures v  The participants will be able to shorten trouble shooting or repair time after having strong ... More

  • SECRETARY AND ADMINISTRATIVE ASSISTANT DEVELOPMENT

    04 Feb 2020
    SCHEDULE  : 10-12 FEBRUARI 2020 PLACE         : YOGYAKARTA DURATION : 3 DAYS   INTRODUCTION The development of an organization always demanding quality improvement of resources involved in it. Secretary and Administrative Assistant plays an important role in maintaining the smooth pace of corporate dynamics. Increasing the volume of routine work and additional duties of company secretary and always weigh the Secretary and Administrative ... More

  • ONBECOMING PROACTIVE

    04 Feb 2020
    SCHEDULE : 5-7 FEBRUARI PLACE       : JAKARTA DURATION : 3 DAYS     DESKRIPSI Be proactive’ helps you start taking responsibility for your life, quit passing the blame and ‘be proactive’ changing the way you respond to challenges, focus your time, and think about change can be the secret to being more productive and effective. OBJECTIVES Master managing change and stress Understand techniques for overcoming ... More

  • FUNDAMENTAL ELECTRICAL ENGINEERING

    16 Jan 2020
    SCHEDULE: 5-7 FEBRUARI 2020 PLACE      : YOGYAKARTA DURATION: 3 DAYS   WHO SHOULD ATTEND Facilities and Project Engineers as well as new Instrumentation, Controls and Electrical Engineers who need to improve their basic understanding of electrical systems within oil and gas facilities YOU WILL LEARN The key components of facilities electric power distribution which include circuit arrangements, low and medium voltage switchgear, and single-phase ... More

  • GAS CONDITIONING AND PROCESSING

    16 Jan 2020
    SCHEDULE: 3-5 FEBRUARI 2020 PLACE      : BANDUNG DURATION: 3 DAYS   INTRODUCTION With rapidly increasing demand for natural gas, more and more people will need to require expertise in gas engineering technology. This course incorporate a proper balance between theory and application so the delegates from the company can immediately apply the acquired techniques to the field problems.   BENEFIT Develop a "feel" for the important parameters ... More

  • DISTRIBUTED CONTROL SYSTEM

    02 Des 2019
    SCHEDULE     : 9-11 DESEMBER 2019 PLACE           : PEKANBARU DURATION     : 3 DAYS     INTRODUCTION DCS is controller utility used  to control process in plant floor. All of process variables can be monitored and visualized throught monitor and can be supervisory control to process throught this Human Interface system by operator. For being familiarized and skilled in this ... More

  • Failure Modes Effects And Criticality Analysis

    29 Nov 2019
    SCHEDULE    : 11-13 DESEMBER 2019 PLACE          : YOGYAKARTA DURATION    : 3 DAYS   DESCRIPTION Failure Modes Effects and Criticality Analysis (FMECA), is a technique which allows the most appropriate maintenance tasks to be selected for equipment. It is a rigorous technique originally developed for the Nuclear Industry in the 1960s but since that time it has also been applied successfully to a wide ... More

  • DISTRIBUTED CONTROL SYSTEM

    29 Nov 2019
    SCHEDULE : 05 DESEMBER 2019 PLACE       : YOGYAKARTA DURATION : 3 DAYS     INTRODUCTION DCS is controller utility used  to control process in plant floor. All of process variables can be monitored and visualized throught monitor and can be supervisory control to process throught this Human Interface system by operator. For being familiarized and skilled in this field of work for operators, they should be trained how to operate this ... More

  • TRANSFORMER MAINTENANCE & OPERATION

    08 Nov 2019
    SCHEDULE  : 25-27 NOVEMBER 2019 PLACE        : YOGYAKARTA DURATION  : 3 DAYS   DESCRIPTION                 Installation of high voltage distribution and transmission equipment has increased significantly over the years due to ongoing global demand for power. As a result, the need to ensure the reliability of operation of power systems is paramount. Power ... More

  • BASIC WELL HEAD CONTROL PANEL

    08 Nov 2019
    SCHEDULE  : 21-23 NOVEMBER 2019 PLACE        : YOGYAKARTA DURATION  : 3 DAYS   DESCRIPTION This course is designed to provide the fundamental knowledge and technical information regarding the operating principles and functions of the wellhead control system. Italso ensures effective understanding of the well control system surface and subsurface configurations with special attention to the wellhead control system and its ... More

  • INDUSTRIAL FLOW MEASUREMENT ENGINEERING

    31 Okt 2019
    SCHEDULE  : 13-14 NOVEMBER 2019 PLACE        : YOGYAKARTA DURATION  : 2 DAYS   DESKRIPSI In a process, flow measurement is a very important tool for controlling that process. The basics of flow measurement and how to convert physical quantities to electricity are discussed in this course. Thus participants understand how flow measurement works, how to calibrate and how to maintain.   OUTCOMES Each audience will ... More

  • CATHODIC PROTECTION RECTIVIER OPS & MNT

    25 Okt 2019
    SCHEDULE  : 19 - 21 NOVEMBER 2019 PLACE        : YOGYAKARTA DURATION  : 3 DAYS   OBJECTIVES This course provides attendees with the fundamentals and methods of cathodic protection, component design & operation troubleshooting rectifier, installation and routine maintenance and also troubleshooting standard units.   COURSE MATERIALS Cathodic protection Part of Cathodic Protection Autotrafo on cathodic ... More

  • MULTI PHASE FLOW METER

    25 Okt 2019
    SCHEDULE  : 12 - 15 NOVEMBER 2019 PLACE        : YOGYAKARTA DURATION  : 4 DAYS   DESKRIPSI  In a process, flow measurement is a very important tool for controlling that process. The basics of flow measurement and how to convert physical quantities to electricity are discussed in this course. Thus participants understand how flow measurement works, how to calibrate and how to maintain.   OUTCOMES Each audience will ... More

  • INDUSTRIAL FLOW MEASUREMENT ENGINEERING

    22 Okt 2019
    SCHEDULE  : 30-31 OKTOBER 2019 PLACE        : YOGYAKARTA DURATION  : 2 DAYS   DESKRIPSI In a process, flow measurement is a very important tool for controlling that process. The basics of flow measurement and how to convert physical quantities to electricity are discussed in this course. Thus participants understand how flow measurement works, how to calibrate and how to maintain.   OUTCOMES Each audience will ... More

  • PROCESS HAZARD ANALYSIS

    18 Okt 2019
    SCHEDULE  : 28-30 OKTOBER 2019 PLACE        : YOGYAKARTA DURATION  : 3 DAYS   DESCRIPTION A Process Hazard Analysis (PHA) is a set of organized and systematic assessments of the potential hazards associated with an industrial process. The PHA provides information intended to assist managers and employees in making decisions for improving safety and reducing the consequences of unwanted or unplanned releases of hazardous chemicals. ... More

  • CHOKE & CONTROL VALVE

    16 Okt 2019
    SCHEDULE  : 21-23 OKTOBER 2019 PLACE        : YOGYAKARTA DURATION  : 3 DAYS   DESCRIPTION This course is a practical knowledge of selection, installation of choke and control valves. Design, specification and implementation of control and operation in gas plant process   COURSE CONTENT Basic physical properties Fundamental of measurement Fundamentals of flow characteristics Control valves Pressure drop Flow ... More

  • HAZARRDOUS CHEMICAL & MATERIAL HANDLING

    16 Okt 2019
    SCHEDULE  : 18-20 OKTOBER 2019 PLACE        : YOGYAKARTA DURATION  : 3 DAYS   OBJECTIVE Upon completing this course, participant will gain skill in safe handling of hazardous chemicals and develop their ability to identify hazards of chemicals and how to act correctly either in handling or in transporting those stuffs. Also they will be able to develop an emergency response plan if any undesired event occurs with those hazardous ... More

  • FINANCE FOR NON FINANCE MANAGER

    11 Okt 2019
    SCHEDULE  : 16-18 OKTOBER 2019 PLACE        : YOGYAKARTA DURATION  : 3 DAYS   DESRIPTION   Money is the language of business. The ability to understand and analyse financial data is essential for successful management. This one-day financial management course is designed to help executives come to grips with the fundamentals of finance and accounting.   Can you read a balance sheet? Or what a profit and loss is ... More

  • PUMPS, COMPRESSORS & DRIVERS

    11 Okt 2019
    SCHEDULE    : 16-18 OKTOBER 2019 PLACE          : YOGYAKARTA DURATION    : 3 DAYS   What You Will Learn •    Develop a feel for the important parameters in designing, selecting, specifying, installing, operating and maintaining pumps, compressors and drivers •    Understand the difference between suction head, suction lift and total dynamic head ... More

  • INDUSTRIAL FLOW MEASUREMENT ENGINEERING

    11 Okt 2019
    SCHEDULE   : 30-31 OKTOBER, 5-6 NOVEMBER, 13-14 NOVEMBER PLACE         : YOGYAKARTA DURATION   : 2 DAYS   DESKRIPSI   In a process, flow measurement is a very important tool for controlling that process. The basics of flow measurement and how to convert physical quantities to electricity are discussed in this course. Thus participants understand how flow measurement works, how to calibrate and how to ... More

  • PROCESS CONTROL & INTRUMENTATION

    08 Okt 2019
    SCHEDULE  : 09 - 11 OKTOBER 2019 VENUE        : YOGYAKARTA DURATION  : 3 DAYS   DESCRIPTION Nowadays measurement, instrumentation and process engineers and specialists in technology industries are highly in demand for calibration, inspection, and cost reduction to identify and adopt new measurement technology for improving the operation. With that in mind, the individual must be a qualified person to be able to work on the equipments ... More

  • TRANSPORT OPERATION & MANAGEMENT

    16 Sept 2019
    SHEDULE      : 30 SEPTEMBER - 02 OKTOBER 2019 VENUE          : BALIKPAPAN DURATION    : 3 DAYS   OBJECTIVES Pelatihan ini bertujuan untuk memberikan wawasan dan peningkatan kemampuan staf dan atau pejabat yang berwenang dalam manajemen transportasi dan optimasi transportasi , baik bagi perusahaan manufaktur,perusahaan oil& gas , industri Jasa, institusi pemerintah untuk manajemen ... More

  • GAS PLANT OPERATION & MAINTENANCE

    16 Sept 2019
    SHEDULE       : 24-26 SEPTEMBER 2019 VENUE           : JOGJAKARTA DURATION     : 3 DAYS   MATERI Overview of Natural Gas Industry Overview of Gas Plant Processing Field Operations and Inlet Receiving Compression Gas Treating Gas Dehydration Hydrocarbon Recovery Nitrogen Rejection. Trace-Component Recovery or Removal Liquids Processing Sulfur ... More

  • TURBO MACHINERY MONITORING & PROBLEM ANALYSIS

    16 Sept 2019
    SCHEDULE    : 18-20 SEPTEMBER VENUE          : JOGJAKARTA DURATION    :3 DAYS       DESCRIPTION This training intermediate level program for experienced mechanical equipment engineers to develop and expand their capabilities in monitoring and problem analysis of turbomachinery. This course focuses on defining the systems and subsystems that form the turbomachinery, the potential problems ... More

  • TRANSPORT OPERATION MANAGEMENT

    18 Juli 2019
    SCHEDULE : 1 - 3 AUGUST VENUE : BALIKPAPAN DURATION : 3 DAYS   OBJECTIVES Pelatihan ini bertujuan untuk memberikan wawasan dan peningkatan kemampuan staf dan atau pejabat yang berwenang dalam manajemen transportasi dan optimasi transportasi , baik bagi perusahaan manufaktur,perusahaan oil& gas , industri Jasa, institusi pemerintah untuk manajemen transportasi kota/ kabupaten (seperti penataan manajemen operasi , yang meliputi perijinan, Jaringan Rute, Tarif, Subsidi, ... More

  • MENTORING SKILLS

    18 Juli 2019
    SCHEDULE : 13 - 15 AUGUST VENUE : MELIA PUROSANI/ TENTREM HOTEL/ PRIME PLAZA HOTEL/ GRAND TJOKRO HOTEL/ ACCOR GROUP DURATION : 3 DAYS   DESCRIPTION   The aim of this session is to give delegates information and tips for developing and managing the mentor/mentee relationship. As organisations look for different ways to develop the skills of their people, mentoring is becoming a much used method and this workshop focuses on the skills and approaches necessary to become ... More

  • GAS TURBINE TECHNOLOGY

    16 Juli 2019
    SCHEDULE : 12 - 16 AUGUST VENUE : MELIA PUROSANI/ TENTREM HOTEL/ PRIME PLAZA HOTEL/ GRAND TJOKRO HOTEL/ ACCOR GROUP DURATION : 5 DAYS   DESCRIPTION The use of Gas Turbines in the Power Generation, Petrochemical and Pipeline Industries has increased considerably in the last few years. The development, in particular, of Combined Cycle and Combined Heat and Power applications has accelerated the use of Industrial Gas Turbines. This course will cover the design, operation and ... More

  • FLANGES AND COMPRESSED JOINT INTEGRITY

    15 Juli 2019
    SCHEDULE : 29 - 31 AUGUST VENUE : KAGUM HOTEL GROUP (GOLDEN FLOWER HOTEL/ AMAROOSSA/ GINO FERRUCI/ BANANA INN/ GRAND SERELA/ ACCOR GROUP) DURATION : 3 DAYS   OBJECTIVE In the oil & gas and petrochemical industries, compressors play important role to support all facilities and process that require pressurized gases. Furthermore, air or gas leakage is not acceptable since it affecting on productivity or safety. Hence compressor flange joint integrity should be taken into ... More

  • CATHODIC PROTECTION RECTIFIER OPERATION & MAINTENANCE

    13 Juli 2019
    SCHEDULE : 5 – 7 AUGUST VENUE : PRIME PLAZA JOGJAKARTA HOTEL/MELIA PUROSANI/ACCORD GROUP/TENTREM HOTEL/ GRAND TJOKRO HOTEL DURATION : 3 DAYS   OBJECTIVES   This course provides attendees with the fundamentals and methods of cathodic  protection, component design & operation troubleshooting rectifier, installation and routine maintenance and also troubleshooting standard units.   COURSE MATERIALS      Cathodic ... More

  • ELECTRICAL EQUIPMENT PREDICTIVE AND PREVENTIVE MAINTENANCE

    13 Juli 2019
    SCHEDULE : 16 – 18 Agustus VENUE : PRIME PLAZA JOGJAKARTA HOTEL/MELIA PUROSANI/ACCORD GROUP/TENTREM HOTEL/ GRAND TJOKRO HOTEL DURATION : 3 DAYS   DESCRIPTION The Preventive &Predictive Maintenance Electrical Equipment Training is designed to provide knowledge about the basics of maintenance and testing of electrical equipment in accordance with the standards of electricity power such as IEC, IEEE etc. The training will also be synchronized using ETAP (Electrical ... More

  • PUMPS AND COMPRESSORS

    15 Agust 2018
    SCHEDULE : 04 - 06 SEPTEMBER VENUE : PRIME PLAZA JOGJAKARTA HOTEL/KAGUM GROUP/ACCORD GROUP/SWISS BELINN HOTEL DURATION : 3 DAYS DESCRIPTION This is an intensive 3-day course providing a comprehensive overview of pumps and compressor systems. The focus is on equipment selection – type, unit and station configuration, integration of these units in the process scheme and control strategy in upstream and midstream oil and gas facilities. The material of the course is ... More

  • PROCESS SAFETY MANAGEMENT

    13 Agust 2018
    SCHEDULE : 12-14 SEPTEMBER VENUE : JOGJA PLAZA HOTEL DURATION : 3 DAYS   This course provides an in-depth study of each PSM element. The course introduces each PSM element and the specific guidelines for integrating PSM element requirements into other corporate programs and evaluating program compliance throughout the implementation phase. This course also covers how to expand your PSM program to include the RBPS (risk-based process safety) elements as proposed by the CCPS ... More

  • STEAM TURBINE OPERATION, MAINTENANCE & TROUBLESHOOTING

    24 Juli 2018
    SCHEDULE : 27-30 AGUSTUS 2018 VENUE : JOGJAKARTA PLAZA HOTEL DURATION : 3 DAYS Course Description: This course will focus on the Maintenance of Steam Turbines. The course will cover all aspects of Steam Turbine Maintenance including steam turbine systems, component maintenance and repair, assembly and dis-assembly of major items together with Steam turbine theory and operations. Who Should Attend: This is an essential course for those engineers/technicians involved with ... More

  • GENERATOR, OPERATION, MAINTENANCE AND TROUBLESHOOTING

    19 Juli 2018
    SCHEDULE : 7-9 AGUSTUS VENUE : JOGJA PLAZA HOTEL DURATION : 3 DAYS BENEFITS After completing this course, participants will get the following benefits: Enhance understanding of electric power generator set operation and maintenance, and principles of each main parts Enhance understanding of synchronous generator characteristics and precautions Learn how to run parallel operation and perform load sharing of generator correctly Learn how to inspect prime mover (diesel ... More

  • INTRUMENT AND BASIC CONTROL SYSTEM

    12 Juli 2018
    SCHEDULE : 24-26 JULY 2018 VENUE : JOGJA PLAZA HOTEL DURATION : 3 DAYS  THE PROBLEM The Instrumentation and Process Control Training program provides the training employees need to perform the tasks as a Process Control Technician or an Automated Equipment Engineer.  The curriculum starts with pre-technical foundation courses, and then progress to AC/DC fundamentals, electric motors, basic electronics, electronics testing and troubleshooting, digital ... More

  • STEAM TURBINE OPERATION, MAINTENANCE & TROUBLESHOOTING

    11 Juli 2018
    SCHEDULE : 13-15 AGUSTUS 2018 VENUE : JOGJAKARTA PLAZA HOTEL DURATION : 3 DAYS OBJECTIVES Menambah wawasan para trainee dalam memahami turbin  secara integralistik sehingga para trainee : Dapat  memahami  saling  keterkaitan  antara  komponen komponen alat pada turbin. Dapat mengantisipasi akibat  yang  mungkin  terjadi dengan adanya perubahan perubahan yang sengaja atau tidak sengaja dilakukan. Mampu  mengembangkan  ... More

  • HAZARDOUS SUBTANCES AND WASTE

    28 Juni 2018
    SCHEDULE : 16-18 AGUSTUS 2018 VENUE : JOHJA PLAZA HOTEL DURATION : 3 DAYS INTRODUCTION Hazardous substances are any substances which may pose threats to the environment, to human, plant or animal health. They are often equated with hazardous waste but the risks can arise at any time during the existence of such a substance, from production, storage, transport, use and disposal. Hazardous substances include all hazardous wastes (hazardous materials that are regarded as waste) ... More

  • WATER AND OIL HANDLING PROCESSING

    07 Mei 2018
    SCHEDULE : 7-9 JULI  2018 VENUE : SWISS BELLIN MALANG DURATION : 3 DAYS OBJECTIVES After participate in this course, the participants will be able and capable to : Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application. Understand the fundamentals of microscopic and macroscopic aspects and phenomena of oil, gas and water handling processes. PRE-REQUISITE No specified  ... More

  • KEY PERFORMANCE INDICATOR (BALANCED SCORE CARD)

    20 Apr 2018
    SCHEDULE : 10-12 JULI 2018 VENUE : JOGJA PLAZA HOTEL DURATION : 3 DAYS Deskripsi Dalam keseharian dalam kantor, seluruh karyawan akan dinilai pekerjaan dan performansinya. Tanpa pengukuran performansi, perbaikan kurang mempunyai arti. Jika suatu aktivitas tidak dapat kita ukur, sulit bagi kita untuk memanage aktivitas tersebut. Sehubungan dengan itu pengukuran performansi harus dilakukan dengan baik, dengan menggunakan metode yang tepat sehingga hasil dari pengukuran tersebut ... More

  • PROCESS SAFETY MANAGEMENT

    20 Apr 2018
    SCHEDULE : 7-9 MEI 2018 VENUE : JOGJA PLAZA HOTEL DURATION : 3 DAYS   This course provides an in-depth study of each PSM element. The course introduces each PSM element and the specific guidelines for integrating PSM element requirements into other corporate programs and evaluating program compliance throughout the implementation phase. This course also covers how to expand your PSM program to include the RBPS (risk-based process safety) elements as proposed by the CCPS ... More

  • INSTRUMENT AND BASIC CONTROL SYSTEM

    20 Apr 2018
    SCHEDULE : 3-5 MEI 3018 VENUE : JOGJA PLAZA HOTEL DURATION : 3 DAYS  THE PROBLEM The Instrumentation and Process Control Training program provides the training employees need to perform the tasks as a Process Control Technician or an Automated Equipment Engineer.  The curriculum starts with pre-technical foundation courses, and then progress to AC/DC fundamentals, electric motors, basic electronics, electronics testing and troubleshooting, digital ... More

  • GENERATOR & VOLTAGE REGULATOR

    18 Apr 2018
    SCHEDULE : 22-24 APRIL 2018 VENUE : JOGJA PLAZA HOTEL DURATION : 3 DAYS BENEFITS After completing this course, participants will get the following benefits: Enhance understanding of electric power generator set operation and maintenance, and principles of each main parts  Enhance understanding of synchronous generator characteristics and precautions Learn how to run parallel operation and perform load sharing of generator correctly Learn how to inspect prime mover ... More

  • ADVANCED PUMP TECHNOLOGY

    05 Apr 2018
    SCHEDULE : 16-18 APRIL 2018 VENUE : HOTEL IBIS TAMARIN JAKARTA DURATION : 3 DAYS   Course Introduction: In selecting a process pump, especially for the petroleum and petrochemical industries one must look beyond the immediate need of merely satisfying the stated process parameter requirements. The unit, pump and driver, has to be fully integrated in the process system. Over its entire life cycle the unit has to provide a reliable and economic service, in safety, with full ... More

  • TRANSPORTATION MANAGEMENT

    28 Mar 2018
    SCHEDULE : 26-28 APRIL 2018 VENUE : JOGJA PLAZA HOTEL DURATION : 1-3 DAYS INTRODUCTION : Pelatihan ini diperuntukkan bagi para praktisi, supervisor, manajer yang bergerak di bidang transportasi, pengadaan dan pendistribusian. Memberikan pengetahuan dan keterampilan tentang cara-cara memanajemeni transportasi secara optimal, mulai dari sistem transportasi, lokasi industri dan model transportasinya, kriteria kinerja transportasi, dan lain-lain, sampai dengan evaluasi pembiayaan ... More

  • MAINTENANCE PLANNERS DEVELOPMENT

    26 Mar 2018
    SCHEDULE : 25-27 APRIL 2018 VENUE : JOGJA PLAZA HOTEL DURATION : 1-3 DAYS INTRODUCTION The advancement in technology has tremendously increased the efficiency, product quality and production capacity of production plants to meet the market demands and competitions. However, it also has increased the complexity of the equipments as well as the procedures and efforts to operate and maintain the equipments. Unawareness of this development leads to jeopardizing the increased ... More

  • GENERATOR, OPERATION, MAINTENANCE AND TROUBLESHOOTING

    24 Mar 2018
    SCHEDULE : 26-28 APRIL VENUE : JOGJA PLAZA HOTEL DURATION : 1-3 DAYS BENEFITS After completing this course, participants will get the following benefits: Enhance understanding of electric power generator set operation and maintenance, and principles of each main parts Enhance understanding of synchronous generator characteristics and precautions Learn how to run parallel operation and perform load sharing of generator correctly Learn how to inspect prime mover (diesel ... More

  • BASIC DRILLING

    21 Mar 2018
    SCHEDULE : 26-27 APRIL 2018 VENUE : JOGJA PLAZA HOTEL DURATION : 1-2 DAYS YOU WILL LEARN About drilling equipment and how it is used Drilling terminology and abbreviations Keys to planning a successful well Common drilling problems and how to avoid them How to read a morning report Technology behind information in a morning report   ABOUT THE COURSE Equipment and procedures involved with drilling oil and gas wells are described for those who are interested in ... More

  • BUILDING MAINTENANCE

    20 Mar 2018
    SCHEDULE : 25-27 APRIL 2018 VENUE : JOGJA PLAZA HOTEL DURATION : 1-3 DAYS BACKGROUND Menghasilkan tenaga ahli di bidang Building Maintenance baik untuk level Teknisi, Chief Engineer ataupun Manager. Setelah mengikuti paket kejuruan ini secara lengkap, peserta diharapkan menguasai dasar-dasar perawatan gedung yang baik di bidang Civil, Mechanical & Electrical. COURSE OUTLINE Design Building Sipil Structure Design Sistem Plumbing Sistem Listrik Arus Kuat 1 Sistem ... More

  • Horizontal Drilling Technology

    15 Mar 2018
    SCHEDULE : 24-26 APRIL 2018 VENUE : YOGYAKARTA DURATION : 1-3 DAYS   BENEFITS After attending this course, course participants are expected to: a. Understand the basic design and calculations required in the planning of horizontal wells b. Comprehensive understanding of the knowledge of horizontal drilling technology, which is expected to be able to improve their ability to implement this knowledge in drilling operations in the field. COURSE MATERIALS 1. Introduction of ... More

  • EFFECTIVE BUSSINES PLAN

    15 Mar 2018
    SCHEDULE : 9-11 APRIL 2018 VENUE : YOGYAKARTA DURATION : 1-3 DAYS OBJECTIVE • Membuat “Business Plan” yang sesuai dengan format perusahaan • Memberikan gambaran yang tegas dan jelas mengenai bagaimana rencana perusahaan dalam memanfaatkan peluang bisnis yang ada • Menjabarkan usaha – usaha yang akan dilakukan untuk mencapai visi dan misi yang ... More

  • GENERAL CORROSION OVERVIEW

    13 Mar 2018
    SCHEDULE: 3-5 APRIL 2018 VENUE: JOGJA PLAZA HOTEL DURATION: 1-3 DAYS OBJECTIVES   To Provide the participants with basic knowledge and understanding about Corrosion, types & causes in operation, control option & prevention oil & gas industry:   Understanding of Basic causes of Corrosion, type of corrosion & causes, mitigation & monitoring Selection of Material in Oil & Gas Industry, External & Internal Corrosion prevention, by ... More

  • FMECA (FAILURE MODES, EFFECTS, AND CRITICALITY ANALYSIS)

    12 Mar 2018
    SCHECULE   : 9 - 12 April 2018   VENUE          : Jogjakarta Plaza Hotel   DURATION  :  1- 3 days DESCRIPTION Failure Modes Effects and Criticality Analysis (FMECA), is a technique which allows the most appropriate maintenance tasks to be selected for equipment. It is a rigorous technique originally developed for the Nuclear Industry in the 1960s but since that time it has also been applied successfully to a ... More

  • LUBRICATING OIL ANALYSIS

    12 Mar 2018
      SCHECULE   : 23 - 25 April 2018   VENUE          : Jogjakarta Plaza Hotel   DURATION  :  1- 3 days OUTLINES How Lubrication Affects Machine Reliability Financial benefits from achieving lubrication excellence Five equipment maintenance strategies, and when each applies Important implementation steps to lubrication excellence 10 roadblocks to achieving lubrication excellence Lubrication ... More

  • SAFETY RISK MANAGEMENT IN OIL AND GAS

    20 Feb 2018
    SCHECULE   : 26 - 28 Maret 2018 VENUE          : PT. PERTAMINA HULU MAHAKAM, BALIKPAPAN DURATION  :  1- 3 days DESCRIPTION The course serves as an extensive guide for delegates from management levels to onsite operational staff, and is aimed at a wider audience of stakeholders; oil and gas operators, terminal and tank operators, off-shore and ship operators, bunker providers and agents, port and terminal authorities, ... More

  • ADVANCED PUMP TECHNOLOGY

    20 Feb 2018
    SCHECULE   : 1 - 3 Maret 2018 VENUE          : Swiss Belinn Malang DURATION  :  1- 3 days Course Introduction: In selecting a process pump, especially for the petroleum and petrochemical industries one must look beyond the immediate need of merely satisfying the stated process parameter requirements. The unit, pump and driver, has to be fully integrated in the process system. Over its entire life cycle the unit has to ... More

  • GAS DEHYDRATION & GLYCOL REGENERATION

    05 Feb 2018
    SCHECULE   : 7 - 9 Februari 2018 VENUE          : Jogja Plaza Hotel DURATION  :  1- 3 days   OBJECTIVE After participate in this course, the participants will be able and capable to:   Understand the basic concept of oil , gas and water handling processes and facilities, and how to operate this technology in field application. Diagnostic of oil and gas reservoir performance under actual drive mechanism ... More

  • PLANNING AND ORGANIZING SKILLS

    12 Des 2017
    SCHECULE   : 27 - 29 December 2018 VENUE          : Jogja Plaza Hotel DURATION  :  1- 3 days BENEFITS Define planning Appreciate the importance of planning Plan effectively Improve your planning skills List the disadvantages of planning Define organising Appreciate the importance of organising Develop your organising skills Identify the skills needed for organizing List the advantages of ... More

  • OIL, & GAS CUSTODY METERING

    07 Juli 2017
    SCHEDULE   : 11 - 13 July 2017 VENUE          : Golden Flower Hotel, Bandung DURATION : 3 Days OBJECTIVES Gas flow measurement plays avery vital role in petrochemical industries and process plants.Flow measurement and control is an essential requirement for assuring the quality as per the relevant standards. TOPICS / COURSE CONTENT : 1. Petroelum & Natural gas Flowmeasurement - Standards and Practices Properties of petroleum fluids, ... More

  • SAFETY & RISK MANAGEMENT IN OIL & GAS

    10 Feb 2017
    SCHEDULE  : 3-5 April 2017 VENUE         : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 3 Days DESCRIPTION The course serves as an extensive guide for delegates from management levels to onsite operational staff, and is aimed at a wider audience of stakeholders; oil and gas operators, terminal and tank operators, off-shore and ship operators, bunker providers and agents, port and terminal authorities, safety, security and environmental agencies, ... More

  • HAZARD ANALYSIS & RISK ASSESSMENT

    10 Feb 2017
    SCHEDULE  : 7-9 Maret 2017 VENUE         : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 3 Days DESCRIPTION Risk assessment merupakan hal yang wajib di pelajari bagi semua praktisi industri untuk seluruh level / posisi. Kenapa demikian ? Karena di setiap lini pekerjaan di pastikan mempunyai resiko dari setiap aktifitas yang ada. Pemahanan setiap orang dalam memahami resiko bahaya dari pekerjaan akan menentukan proses penanggulangan yang akan di ... More

  • APPLIED LOGISTICS MANAGEMENT

    10 Feb 2017
    SCHEDULE    : 30 Maret - 01 April 2017 VENUE           : Jogjakarta Plaza Hotel, Yogyakarta DURATION   : 3 Days INTRODUCTION Spare parts intended to support effective maintenance management should be well managed. Complaints normally come from maintenance department due to unavailability of spare parts when they are needed. The correct specification, quality and quantity of the available spare parts will guarantee the effective ... More

  • DISTRIBUTED CONTROL SYSTEM

    23 Jan 2017
    SCHEDULE   : 8-10 Februari 2017 VENUE          : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 3 Days INTRODUCTION DCS is controller utility used  to control process in plant floor. All of process variables can be monitored and visualized throught monitor and can be supervisory control to process throught this Human Interface system by operator. For being familiarized and skilled in this field of work for operators, they should be ... More

  • HAZARD ANALYSIS & RISK ASSESSMENT

    26 Des 2016
    SCHEDULE  : 7 maret - 9 maret 2017 VENUE         :  Jogjakarta Plaza Hotel, Yogyakarta DURATION : 3 Days DESCRIPTION Risk assessment merupakan hal yang wajib di pelajari bagi semua praktisi industri untuk seluruh level / posisi. Kenapa demikian ? Karena di setiap lini pekerjaan di pastikan mempunyai resiko dari setiap aktifitas yang ada. Pemahanan setiap orang dalam memahami resiko bahaya dari pekerjaan akan menentukan proses penanggulangan ... More

  • RISK MANAGEMENT IN PRODUCTION SURFACE FACILITY

    26 Mei 2016
    SCHEDULE : 10 - 13 Juli, 2017 VENUE        : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 3 Days   OBJECTIVES This course is designed to provide participants with a complete overview of Oil and Gas Production and to provide a comprehensive understanding of risk Management until evaluation to handle in production surface facilities . It will be delivered in order to meet the needs of non-technical personnel, and go into detail of technical ... More

  • ACCOMODATION MANAGEMENT

    26 Mei 2016
    SCHEDULE : 12-14 Juli, 2016 VENUE        : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 3 Days Description This course is an excellent first step toward increasing your potential for success in either starting up an accommodation business or taking on a management role within one. Establishing such an enterprise requires an understanding of a wide range of issues including: legal considerations, safety, and accommodation, the tour desk as a ... More

  • COST ANALYSIS TO SUPPORT STRATEGIC DECISION

    26 Mei 2016
    SCHEDULE : 2-3 Juni 2016 VENUE        : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 2 Days INTRODUCTION Cost control is one of the most effective and essential  tool for planning and monitoring organizational activities, as well as supporting future strategic decision. Cost analysis is linked with strategy formulation, the budgetary process and performance management. It is crucial to interpret how costs behave so that realistic ... More

  • ELECTRICAL TRANSFORMATION

    26 Apr 2016
    SCHEDULE   : 2-4 Mei 2016 VENUE          : Ibis Malioboro Hotel, Yogyakarta DURATION : 3 Days     PENDAHULUAN Training ini dirancang untuk mereka yang bekerja dalam bidang yang terkait electrical. Cakupan materi di bawah ini secara menyeluruh akan dibahas di kelas sehingga setelah training ini peserta memahami konsep dan aplikasi di lapangan di tempat kerja. Pemahaman poin-poin dalam training ini sangat dibutuhkan untuk menunjang ... More

  • WASTE WATER AND CHEMICAL HANDLING

    26 Apr 2016
    SCHEDULE   : 17-19 Mei 2016 VENUE          : Ibis Hotel Malioboro, Yogyakarta DURATION  : 3 Days INTRODUCTION AND OBJECTIVE Water treating and chemicals are everyday encountered work and problems must be accomplished in industry. This training is addressed for participants who want to broaden their knowledge horizon, skill and capability on their work responsibility area, learn more detail about many aspects of the nature of water, ... More

  • CONTRACT MANAGEMENT & TENDER

    26 Apr 2016
    SCHEDULE    : 17-19 Mei 2016 VENUE           : Jogjakarta Plaza Hotel, Yogyakarta DURATION   : 3 Days INTRODUCTION High quality Contract and Tender Management are essential activities in achieving improved levels of performance for all organizations. Providing the high value added activities available from contract and procurement operations requires the continuous involvement of knowledgeable professionals and management who understand ... More

  • HSE Audit & Hazard Management in Oil and Gas Exploration and Production Operation

    07 Apr 2016
    SCHEDULE   : 26-28 April 2016 VENUE          : Yogyakarta DURATION  : 3 Days   The health and safety environment within Oil and Gas Oil & Exploration operations is a growing concern as oil production increases to keep up with demand, technology advances creating new hazards and recent high-profile events have brought safety and environment concerns to the forefront demanded by regulators, general public and within operating companies ... More

  • PETROLEUM ENGINEERING FOR NON PETROLEUM ENGINEERS

    07 Apr 2016
    SCHEDULE   : 19 - 21 April 2016 VENUE          : Yogyakarta DURATION : 3 Days TUJUAN PELATIHAN Setelah menyelesaikan kursus ini diharapkan peserta dapat : Memahami prinsip-prinsip dasar eksploitasi minyak, gas bumi yang dikenal sebagai teknologi perminyakan. Melakukan diagnosis sederhana dan memahami pengelolaan data operasi perminyakan, seperti data geologi produksi, data batuan dan fluida reservoir, data produksi, data operasi pemboran ... More

  • FAILURE DEFENSE TASK (FDT)

    07 Apr 2016
    SCHEDULE   : 12-14 April 2016 VENUE          : Yogyakarta DURATION : 3 Days DESKRIPSI Materi ini sangat berperan untuk menjamin tidak terjadinya kegagalan pada seluruh peralatan saat dioperasikan, tidak mengalami derating, dengan biaya optimum, denga meminimalkan atau menghilangkan kegagalan dan penyebabnya, serta melakukan optimasi dan perencanaan. MATERI Pengertian Reliability Management Ruang lingkup proses Reliability ... More

  • APPLIED WATER TECHNOLOGY IN OIL & GAS PRODUCTION

    24 Mar 2016
    SCHEDULE   : 5-7 April 2016 VENUE          : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 3 Days DESCRIPTION This course provides an overview of the main water handling systems typically encountered in upstream (E&P) production operations, both onshore and offshore. The chemistry of the main water-related problems of mineral scales, corrosion, bacteria, and oily water will be reviewed both from the theoretical and practical aspects. Produced ... More

  • MAIN POWER GENERATION AND DISTRIBUTION

    03 Feb 2016
    SCHEDULE : 23-25 Februari 2016 VENUE        : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 3 Days     This program will help the attendees to: Enhance proficiency in applying SE processes/practices over the project life cycle applied to power and energy domains Focus on defining and implementing system projects and provides valuable insight for managing and leading project and technical teams Introduce methods and techniques for a ... More

  • SAFETY & RISK MANAGEMENT IN OIL AND GAS

    03 Feb 2016
    SCHEDULE : 9-11 Februari 2016 VENUE        : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 3 Days DESCRIPTION The course serves as an extensive guide for delegates from management levels to onsite operational staff, and is aimed at a wider audience of stakeholders; oil and gas operators, terminal and tank operators, off-shore and ship operators, bunker providers and agents, port and terminal authorities, safety, security and environmental agencies, intermodal ... More

  • BUDGETING AND COST CONTROL

    03 Feb 2016
    SCHEDULE : 10 - 13 Februari 2016 VENUE        : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 4 Days INTRODUCTION All business decision-making involves analyzing situations containing varying degrees of risk. This seminar uncovers the essential skills required to understand the processes of budgeting and cost control for better decision-making. From understanding the importance of a well defined budget process through to the importance of how ... More

  • PROCESS CONTROL AND SAFETY INSTRUMENTATION

    06 Okt 2015
    SCHEDULE     : 19-21 Oktober 2015 VENUE            : Jogjakarta Plaza Hotel, Yogyakarta DURATION   : 3 Days DESCRIPTION Nowadays measurement, instrumentation and process engineers and specialists in technology industries are highly in demand for calibration, inspection, and cost reduction to identify and adopt new measurement technology for improving the operation. With that in mind, the individual must be a qualified person to ... More

  • BASIC CORROSION IN OIL AND GAS FIELDS

    06 Okt 2015
    SCHEDULE   : 21-24 Oktober 2015 VENUE          : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 4 Days COURSE OVERVIEW This course is designed for managers, engineers and operators requiring an understanding of corrosion fundamentals including the causes and control of corrosion in oil and gas production and processing. This course will provide an overview of what corrosion is and what the major corrosion issues are in upstream oil and gas ... More

  • UNDERSTANDING OIL & GAS EXPLORATION AND DEVELOPMENT

    11 Sept 2015
    SCHEDULE : 28-30 September 2015 VENUE        : Golden Flower Hotel, Bandung DURATION  : 3 Days DESCRIPTION The discovery and development of oil and gas and transportation, processing and marketing remain crucial to the world economy and play a key role both for producers and consumers. The industry consists of a series of stages, which collectively create the industry’s ability to add value. Each stage has its own technology and engineering, its ... More

  • DAILY WELL MANAGEMENT

    09 Sept 2015
    SCHEDULE : 17-19 September 2015 VENUE        : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 3 Days OBJECTIVES Setelah menyelesaikan ini diharapkan peserta dapat: Memahami prinsip-prinsip dasar penyelesaian sumur produksi minyak dan gas bumi (oil and gas well completion)  . Melakukan diagnosis sederhana dalam menagani problema pada sumur produksi di lapangan yang disebabkan oleh reservoir atau fasilitas ... More

  • ALIGNMENT AND VIBRATION INSPECTION

    25 Agust 2015
    SCHEDULE  : 7 - 9 September 2015 VENUE         : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 3 Days LATAR BELAKANG Getaran berlebihan pada mesin dapat disebabkan oleh mislignment, mislevelling dan unbalance yang dapat mengakibatkan life time dari mesin rendah. Setiap mesin yang diinstalasi atau dirakit tidak diperbolehkan melebihi standar misalignment, mislevelling, dan unbalance. Semakin tinggi putaran mesin yang digunakan maka harus semakin teliti ... More

  • FLANGES ANG PIPING SYSTEM

    06 Juni 2015
    VENUE          : Jogjakarta Plaza Hotel SCHEDULE   : 28-30 Juli 2015 DURATION  : 3 Days     OBJECTIVE After completion of training, participants will : Having knowledges more expanded in flange and piping system. Understanding parameters which determining of design. Be able to do material selection Understanding the fabrication ways of components and testing. Be able to handle critical problems related to piping and ... More

  • PIPELINE PIGGING OPERATION

    23 Mei 2015
    VENUE         : Jogjakarta Plaza Hotel, Yogyakarta SCHEDULE  : 26-28 Mei 2015 DURATION : 3 Days INTRODUCTION  Pigging is not just about high-level inspection; rather, the basics of pipeline design and of utility pigging to accommodate the most mundane tasks, are in the long term probably even more important. TRAINING OBJECTIVE After the course participant will : Have a good aknowledge of pigging technology Pigging operation and time ... More

  • 150 KV ELECTRICAL TRANSMISSION

    22 Apr 2015
    SCHEDULE   :  11-13 Mei 2015 VENUE          :  Ibis Malioboro Hotel, Yogyakarta DURATION  : 3 days OBJECTIVES - Memahami dasar-dasar teori transmisi listrik tegangan tinggi - Memahami komponen-komponen saluran transmisi 150 kV - Memahami cara mendesain saluran transmisi 150 kV - Memahami cara-cara konstruksi saluran transmisi 150 kV - Memahami permasalahan dan penanggulangannya saluran transmisi 150 kV - Memahami ... More

  • PEST CONTROL FOR OIL AND GAS INDUSTRY

    22 Apr 2015
    SCHEDULE   :  21-23 Mei 2015 VENUE         :  Ibis Hotel, Yogyakarta DURATION   : 3 days      Salah satu hal yang terpenting dimana tidak bisa di lepaskan dalam membangun sistem manajemen keamanan pangan. Sebuah perusahaan wajib memiliki manajemen pengendalian hama (pest Control) yang menjadi kunci kesuksesan sistem manajemen keamanan pangan. Hal ini beranjak dari berbagai macam kerugian yang disebabkan, karena di jumpai ... More

  • LIGHTNING PROTECTION

    17 Mar 2015
    SCHEDULE  : 25-28 Maret 2015 VENUE         : Jogjakart a Plaza Hotel, Yogyakarta DURATION : 4 Days COURSE DESCRIPTION Petir adalah sebuah cahaya yang terang benderang yang dihasilkan oleh tenaga listrik alam yang terjadi di antara awan-awan ataupun dari awan ke tanah. Kejadian ini sering kali terjadi apabila cuaca sedang mendung maupun terjadinya badai. Penyebab dari kerusakan bangunan yang diakibatkan oleh sambaran petir terutama adalah dari besar ... More

  • MAINTENANCE PLANNING AND SCHEDULING

    28 Feb 2015
    SCHEDULE   :24-26 Maret 2015 VENUE          : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 3 Days DESCRIPTION Broadly speaking, intended for maintenance of facilities and infrastructure industries can always work as it has been defined as: the productivity of the machine according to the target, low-cost, safe machine operation, and so forth. Along with the increasing complexity of industrial equipment, both oil and gas industry or the ... More

  • ELECTRICAL ENGINEERING FOR NON ELECTRICIANS

    28 Feb 2015
    SCHEDULE   : 7-9 Mei 2015 VENUE          : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 3 Days TRAINING OBJECTIVES  Tujuan dari training ini adalah untuk menambah wawasan mengenai konsep dasar sistem kelistrikan. Pelatihan ditekankan pada pemahaman mengenai aspek pemanfaatan energi listrik, penggunaan peralatan-peralatan listrik serta aspek keselamatan dalam pemanfaatan sistem kelistrikan. Dengan demikian setelah mengikuti pelatihan ... More

  • MODERN MAINTENANCE MANAGEMENT

    28 Feb 2015
    SCHEDULE   : 11-13 Maret 2015 VENUE          : Ibis Tamarin Hotel, Jakarta DURATION  : 3 Days BACKGROUND As the requirements for improved productivity and cost effectiveness increase, combined with an increased attention to safety and environmental issues, maintenance activities play an important role. Modern maintenance management techniques will give a significant contribution to a company’s productivity by applying reliability based ... More

  • ELECTRICAL INSTALLATION IN HAZARDOUS LOCATION

    24 Feb 2015
    SCHEDULE :9-11 Maret 2015 VENUE        : Golden Flower Hotel, Bandung DURATION: 3 Days DESCRIPTION Preventing the unintentional ignition of explosive atmospheres is a critical safety and economic aspect of all petroleum and chemical plant operations. In this programme you will learn how to: Identify and quantify the hazardous areas Select appropriate electrical equipment and instruments for those areas Recognise the different methods of protection eg Ex ... More

  • GAS DEHYDRATION SYSTEM

    07 Feb 2015
    SCHEDULE  : 3-5 Maret 2015 VENUE         : Ibis Tamarin Hotel, Jakarta DURATION  : 3 Days   DESKRIPSI This course is designed to familiarize participants with the design and operation of dehydration equipment, with an emphasis on dehydration with triethylene glycol (TEG). Other dehydration methods, such as dry desiccant and refrigeration, are also covered. The course is designed for technical and operations personnel that design or operate ... More

  • IN-HOUSE SAFETY AND RISK MANAGEMENT IN OIL & GAS

    29 Jan 2015
    SCHEDULE    :  9 - 11 Maret 2015 VENUE           :  TOTAL E&P INDONESIE (Hotel Blue Sky), Balikpapan, Kalimantan Timur DURATION   :  3 Days DESCRIPTION The course serves as an extensive guide for delegates from management levels to onsite operational staff, and is aimed at a wider audience of stakeholders; oil and gas operators, terminal and tank operators, off-shore and ship operators, bunker providers and agents, ... More

  • SAFETY INSTRUMENT SYSTEM & CONTROL

    29 Jan 2015
    SCHEDULE      :  3 - 5 Maret 2015 VENUE             :  Hotel Ibis Tamarin, Jakarta DURATION     :  3 Days   DESCRIPTION             The operation of many industrial processes involves inherent risks due to the presence of dangerous material like gases and chemicals. Safety Instrumented Systems SIS are specifically designed to protect personnel, ... More

  • ELECTRICAL FOR POWERLINE

    23 Jan 2015
    SCHEDULE  : 10-12 Februari 2015 VENUE         : Golden Flower Hotel, Bandung DURATION  : 3 Days DESCRIPTION: This course introduces basic electrical theory and concepts as it relates to the power line industry.   COURSE OUTLINE Double Braid Rope Line Conductors Power Splicing and Knot Tying and Splicing Double Braid Rope Batteries No Load Tap Changer Introduction to Voltage Regulators Introduction to ... More

  • TURBO COMPRESSOR OPERATION & MAINTENANCE

    05 Des 2014
    SCHEDULE : 10-12 Desember 2014 VENUE       : Jogjakarta Plaza Hotel, Yogyakarta DURATION: 3 Days   COURSE OVERVIEW This four days course will provide participants with an in-depth overview of the design, operation and maintenance of centrifugal compressors typically used in pipeline compression, plant processes and other applications. Advanced technologies such as dry gas seals, hermetic compressors, magnetic bearings and condition monitoring will also be ... More

  • MASTER ARTS OF INTERNAL COMMUNICATION

    01 Des 2014
    SCHEDULE : 11-13 DESEMBER 2014 VENUE        : Jogjakarta Plaza Hotel,Yogyakarta DURATION: 3 Days   DESCRIPTION Untuk menjalankan aktivitas usaha setiap organisasi tentunya tidak terlepas dari aspek komunikasi. Oleh karenanya peran komunikasi sangat penting sebagai strategi untuk dapat menciptakan “value power communications”. Sehingga untuk mencapai tujuan tersebut, setiap perusahaan tentunya akan mengoptimalkan Internal ... More

  • HUMAN RESOURCE POLICIES & PROCEDURES (SOP) HRD

    17 Nov 2014
    SCHEDULE : 8-10 Desember 2014 VENUE        : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 3 Days   PENGANTAR Membahas secara komprehensip teknik penyusunan Standard Operating Procedure (SOP) HRD dilengkapi dengan contoh-contoh formulir yang terkait dengan berbagai kebijakan (policy) bidang HRD.   TUJUAN PELATIHAN Meningkatkan kemampuan peserta dalam menganalisa efektifitas kegiatan dan kebijakan HRD yang berlaku beserta langkah-langkah ... More

  • CANTEEN HYGIENE

    13 Nov 2014
    SCHEDULE  : 3-5 Desember 2014 VENUE         : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 3 Days BENEFIT COURSE Untuk meningkatkan pengetahuan dan ketrampilan tenaga kerja agar memiliki pengetahuan di bidang higinie kantin sehingga dapat melakukan pengenalan atau identifikasi, evaluasi dan pengendalian serta perbaikan terhadap risiko yang dapat mempengaruhi kesehatan dan keselamatan tenaga kerja di lingkungan kerjanya. COURSE OUTLINES Aturan ... More

  • ISO 9001:2008 SERIES QMS INTERNAL AUDITOR WITH SIMULATION

    11 Nov 2014
    SCHEDULE  : 25-27 November 2014 VENUE         : Jogjakarta Plaza Hotel/Ibis Hotel DURATION  : 3 Days     OVERVIEW This intensive, challenging and highly interactive and practical course is designed to develop delegates' skills to conduct Quality Management System (QMS) audits in order to: Promote their own organisation's performance and identify opportunities for improvement Objectively assess a company/supplier against third ... More

  • CONTRACTING COURSE FOR OIL & GAS

    30 Okt 2014
    SCHEDULE    : 10 - 12 November 2014 VENUE           : Jogjakarta Plaza Hotel, Yogyakarta DURATION   : 3 Days DESCRIPTION Kontrak di bidang Minyak & Gas adalah suatu aspek kritis yang dapat menyebabkan terobosan besar dalam anggaran organisasi karena proses litigasi mahal dan proses penyelesaian sengketa. Sebuah pengamatan yang baik dan analisis secara keseluruhan atas draf kontrak untuk menghapus ambiguitas dan klausa ... More

  • ADVANCED CERTIFICATE IN STRATEGIC PROCUREMENT (ACSP)

    30 Okt 2014
    SCHEDULE   : 3 - 5 November 2014 VENUE           : Jogjakarta Plaza Hotel, Yogyakarta DURATION   : 3 Days COURSE OVERVIEW Effective Procurement is, and always has been, fundamental to the success of an organisation. On average, over fifty percent  of an organisation’s total revenue is passed down  the Supply Chain. In many sectors however, this can be significantly more for example in the Public Sector, this can exceed ... More

  • FIELD WATER MANAGEMENT IN OIL & GAS INDUSTRY

    21 Okt 2014
    SCHEDULE  : 4-6 NOVEMBER 2014 VENUE         : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 3 Days COURSE DESCRIPTION A comprehensive course, which deals with produced water treatment and handling within the overall context of oil production operations, it provides a brief review of water in the reservoir and the methods by which water is produced to allow forecasting of rates for equipment sizing considerations. Includes review of ... More

  • SAFETY INTEGRITY LEVEL

    21 Okt 2014
    SCHEDULE  :   27 - 29 Oktober VENUE         :   Jogjakarta Plaza Hotel, Yogyakarta DURATION :   3 Days DESCRIPTION The International Electro technical Commission (IEC) provides an IEC61508 & IEC 61511 standard. These codes are established rules of the design, and selection of safety instrumented systems (SIS), they are the statistical representations of the reliability on the particular functions when a process demand occurs. The ... More

  • HACCP (HAZARD ANALYSIS CRITICAL CONTROL POINT)

    06 Okt 2014
    SCHEDULE  : 15 - 17 Oktober 2014 VENUE         : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 3 Days COURSE OUTLINE What does HACCP stand for?                 Hazard Analysis Critical Control Points. What is Hazard Analysis Critical Control Points?                 It is a Food Safety ... More

  • LUBRICATING OIL ANALYSIS

    03 Sept 2014
    SCHEDULE     : 9 - 12 September 2014 VENUE            : Ibis Malioboro Hotel, Yogyakarta DURATION   : 4 Days OUTLINES How Lubrication Affects Machine Reliability Financial benefits from achieving lubrication excellence Five equipment maintenance strategies, and when each applies Important implementation steps to lubrication excellence 10 roadblocks to achieving lubrication excellence Lubrication Fundamentals Six ... More

  • PUMPS & COMPRESSORS

    03 Sept 2014
    SCHEDULE     : 9 - 11 September 2014 VENUE            : Ibis Malioboro Hotel, Yogyakarta DURATION   : 3 Days DESCRIPTION This is an intensive 4-day course providing a comprehensive overview of pumps and compressor systems. The focus is on equipment selection – type, unit and station configuration, integration of these units in the process scheme and control strategy in upstream and midstream oil and gas facilities. The ... More

  • FUNDAMENTAL ELECTRICAL ENGINEERING

    03 Sept 2014
    SCHEDULE     :  8 - 11 September 2014 VENUE            : Ibis Malioboro Hotel, Yogyakarta DURATION   : 4 Days WHO SHOULD ATTEND Facilities and Project Engineers as well as new Instrumentation, Controls and Electrical Engineers who need to improve their basic understanding of electrical systems within oil and gas facilities YOU WILL LEARN The key components of facilities electric power distribution which include circuit ... More

  • ASME Design & Fabrication of Pressure Vessesl

    03 Sept 2014
    SCHEDULE   : 8 - 10 September 2014 VENUE          : Ibis Malioboro Hotel, Yogyakarta DURATION : 3 Days   OBJECTIVES Be able to calculate, analyze both stress and strength in pressure vessel design Gain knowledge of proper material selection for pressure vessel application Gain knowledge of welding code standard, which includes inspection, and testing Gain better skill to operate, maintain, and repair of pressure vessel Perform vessel ... More

  • PREVENTIVE PREDICTIVE MAINTENANCE MANAGEMENT

    22 Agust 2014
    SCHEDULE   : 1 - 4 September 2014 VENUE          : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 4 Days TRAINING DESCRIPTION This course is designed for maintenance supervisors, managers, PM leads, CMMS managers, planners, engineers and people who are training for these positions. PM techs can also benefit from this training. Also welcome are representatives from operations (particularly production control) ... More

  • TRANSFORMER OIL ANALYSIS

    22 Agust 2014
    SCHEDULE  : 1 - 4 September 2014 VENUE         : Golden Flower Hotel, Bandung DURATION  : 4 Days OBJECTIVES The purpose of the training : Acquiring the knowledge needed to define and implement an adequate program of oil analyses to monitor the condition of transformers. Understanding and interpreting oil analysis reports and implementing maintenance recommendations.   COURSE CONTENT The training starts with a ... More

  • PRESSURE SAFETY VALVE : OPERATION AND MAINTENANCE

    22 Agust 2014
    SCHEDULE   : 25 - 28 Agustus 2014 VENUE          : Jogjakarta Plaza Hotel, Yogyakarta DURATION  : 4 Days OBJECTIVES The function of a pressure safety valve is to protect pressure vessels, piping systems, exchanger, boiler and other equipment from pressures exceeding their design pressure by more that a fixed predetermined amount. The permissible amount of overpressure is covered by various codes and is a function of the ... More

  • FMECA "FAILURE MODES, EFFECT, AND CRITICALITY ANALYSIS"

    06 Juni 2014
    SCHEDULE  : 10 - 13 JUNI 2014 VENUE         : JOGJAKARTA PLAZA HOTEL, YOGYAKARTA DURATION : 4 DAYS DESCRIPTION Failure Modes Effects and Criticality Analysis (FMECA), is a technique which allows the most appropriate maintenance tasks to be selected for equipment. It is a rigorous technique originally developed for the Nuclear Industry in the 1960s but since that time it has also been applied successfully to a wide range of industries. It ... More

  • SURFACE PRODUCTION OPERATION

    06 Juni 2014
    SCHEDULE  : 9 - 12 JUNI 2014 VENUE         : JOGJAKARTA PLAZA HOTEL, YOGYAKARTA DURATION : 4 DAYS OBJECTIVES After completion of this course, the participants will be able and capable to : Understand the basic concept of oil and gas handling processes and facilities, and how to operate this technology in field application. Diagnostic of oil and gas reservoir performance under actual drive mecanism and future performance with current handling ... More

  • IN-HOUSE FMECA "FAILURE MODES, EFFECT AND CRITICALITY ANALYSIS"

    19 Mei 2014
    SCHEDULE : 3 - 5 JUNI 2014 (BATCH I) VENUE      : INDONESIA POWER, Perak-Grati DURATION : 3 DAYS   DESCRIPTION Failure Modes Effects and Criticality Analysis (FMECA), is a technique which allows the most appropriate maintenance tasks to be selected for equipment. It is a rigorous technique originally developed for the Nuclear Industry in the 1960s but since that time it has also been applied successfully to a wide range of industries. It ... More

  • FMECA "FAILURE MODES, EFFECT, AND CRITICALITY ANALYSIS

    12 Mei 2014
    SCHEDULE  : 30 MEI - 1 JUNI 2014 VENUE         : JOGJAKARTA PLAZA HOTEL, YOGYAKARTA DURATION : 3 DAYS DESCRIPTION Failure Modes Effects and Criticality Analysis (FMECA), is a technique which allows the most appropriate maintenance tasks to be selected for equipment. It is a rigorous technique originally developed for the Nuclear Industry in the 1960s but since that time it has also been applied successfully to a wide range of industries. It ... More

  • 150 KV ELECTRICAL TRANSMISSION

    12 Mei 2014
    SCHEDULE  : 26 - 29 MEI 2014 VENUE         : GOLDEN FLOWER HOTEL, BANDUNG DURATION : 4 DAYS       OBJECTIVES - Memahami dasar-dasar teori transmisi listrik tegangan tinggi - Memahami komponen-komponen saluran transmisi 150 kV - Memahami cara mendesain saluran transmisi 150 kV - Memahami cara-cara konstruksi saluran transmisi 150 kV - Memahami permasalahan dan penanggulangannya saluran transmisi 150 kV - Memahami troubleshooting dan ... More

  • MAINTENANCE OF BUILDING

    12 Mei 2014
    SCHEDULE  : 14 - 17 MEI 2014 VENUE         : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 4 Days           BACKGROUND Menghasilkan tenaga ahli di bidang Building Maintenance baik untuk level Teknisi, Chief Engineer ataupun Manager. Setelah mengikuti paket kejuruan ini secara lengkap, peserta diharapkan menguasai dasar-dasar perawatan gedung yang baik di bidang Civil, Mechanical & Electrical.   COURSE ... More

  • REDA PUMP

    11 Apr 2014
    SCHEDULE   : 14 - 17 April 2014 VENUE          : Jogjakarta Plaza Hotel DURATION  : 4 Days INTRODUCTION Reda pump has become a generic name for the type of pump lifting Electric Submersible Pump (ESP) in oil wells. Reda itself is one brand of ESP is now owned by Schlumburger. In general, the construction of the ESP, any brand, consisting of filter, submersible motors, gas separator, casing, multistage centrifugal ... More

  • SAFETY INSTRUMENT SYSTEM AND CONTROL

    25 Mar 2014
    SCHEDULE : 1 - 4 April 2014 VENUE        : Jogjakarta Plaza Hotel, Yogyakarta DURATION : 4 Days DESCRIPTION             The operation of many industrial processes involves inherent risks due to the presence of dangerous material like gases and chemicals. Safety Instrumented Systems SIS are specifically designed to protect personnel, equipment and the environment by reducing the ... More

  • BEARING & LUBRICATION ANALYSIS

    19 Feb 2014
    SCHEDULE         :  31 Maret - 3 April , 2014 VENUE                :  Jogjakarta Plaza Hotel, Yogyakarta DURATION        :  4 days BENEFIT : At the end of this programme, the participants are expected to: Better understanding of bearing and lubrication system and enable to modify lubrication supply system and construction to avoid repeating ... More

  • CHOKE AND CONTROL VALVE BATCH II

    19 Feb 2014
    SCHEDULE    : 17 - 20 Maret 2014 VENUE           : Jogjakarta Plaza Hotel, Yogyakarta DURATION   : 4 Days DESCRIPTION This course is a practical knowledge of selection, installation of choke and control valves. Design, specification and implementation of control and operation in gas plant process.   COURSE CONTENT Basic physical properties Fundamental of measurement Fundamentals of flow ... More

  • IN HOUSE RISK MANAGEMENT IN SURFACE PRODUCTION FACILITIES (BATCH 2)

    27 Nov 2013
    SCHEDULE      : 30 September - 3 Oktober ‘2013 VENUE            : Blue Sky Hotel, Balikpapan DURATION     : 4 days   DESCRIPTION This course is designed to provide participants with a complete overview of Oil and Gas Production and to provide a comprehensive understanding of risk Management until evaluation to handle in production surface facilities . It will be delivered in order to meet the needs of ... More

  • PROCUREMENT & PURCHASING PROPERTY AND INVENTORY MANAGEMENT

    26 Nov 2013
    Schedule       : Des 23th, 2013 – Des 25th , 2013 Venue            : Kartika Plaza Hotel, Bali  Duration        : 3 days DESKRIPSI  PELATIHAN Pelatihan ini membahas tentang strategi pembelian yaitu adanya proses perencanaan, pelaksanaan, evaluasi, dan pengawasan strategis dan operasi keputusan pembelian untuk mengarahkan seluruh kegiatan fungsi pembelian ... More

  • IN-HOUSE CHOKE AND CONTROL VALVE

    26 Nov 2013
    Schedule    : Des 13th, 2013 – Des 15th , 2013 Hotel          : Blue Sky Hotel, Balikpapan Venue         : TOTAL E&P Indonesie Balikpapan Duration      : 3 days DESCRIPTION This course is a practical knowledge of selection, installation of choke and control valves. Design, specification and implementation of control and operation in gas ... More

  • RECIPROCATING GAS COMPRESSOR

    22 Nov 2013
    SCHEDULE              : 18 – 21 December 2013 VENUE                      : Jogjakarta Plaza Hotel, Yogyakarta DURATION              : 4 days OUTCOMES This course is designed for both technical professionals and field staff and will provide ... More

  • CRYSTAL BALL

    21 Nov 2013
    SCHEDULE           : 17 – 19 December 2013 VENUE                  :Jogjakarta Plaza Hotel DURATION          :3 days In this course, you will learn to perform spreadsheet risk analysis using Crystal Ball Standard Edition. You will learn the basics of Monte Carlo simulation, tornado analysis, and steps to ... More

  • BEARING AND LUBRICATION ANALYSIS

    21 Nov 2013
    SCHEDULE           : 17 – 19 December 2013 VENUE                  :Jogjakarta Plaza Hotel DURATION          :3 days   BENEFIT : At the end of this programme, the participants are expected to: Better understanding of bearing and lubrication system and enable to modify lubrication supply system ... More

  • DESIGN, CONSTRUCTION AND MAINTENANCE OF ROAD

    04 Nov 2013
    SCHEDULE     : 11 - 14 November 2013 VENUE            : Jogjakarta Plaza Hotel - Yogyakarta DURATION    : 4 Days INTRODUCTION: The topic of construction broadly encompasses the issues relevant to the process of road construction and maintenance, including the design, contracting, implementation, supervision, and maintenance of roads and related structures, such as bridges and interchanges. For purposes of the knowledge base ... More

  • PURCHASING PROPERTY AND INVENTORY MANAGEMENT

    11 Okt 2013
    SCHEDULE     : 28 – 30 Oktober , 2013 VENUE            : Santika Hotel - Malang DURATION     : 3 days   DESKRIPSI  PELATIHAN Pelatihan ini membahas tentang strategi pembelian yaitu adanya proses perencanaan, pelaksanaan, evaluasi, dan pengawasan strategis dan operasi keputusan pembelian untuk mengarahkan seluruh kegiatan fungsi pembelian terhadap peluang konsisten dengan ... More

  • FOOD HYGIENE SANITATION AND MONITORING

    09 Sept 2013
    SCHEDULE        : 21 – 24 October , 2013 VENUE             : Jogjakarta Plaza Hotel, Yogyakarta DURATION         : 4 days   INTRODUCTION Every time, we hear of the occurrence of food poisoning (food poisoning) as a result of incorrect handling of food. To prevent such a thing, should be given training for implementing renderers / managers of food ... More

  • REDA PUMP

    30 Agust 2013
    SCHEDULE     : 10 – 13 September , 2013 VENUE            : Jogjakarta Plaza Hotel - Yogyakarta DURATION     : 4 days   INTRODUCTION Reda pump has become a generic name for the type of pump lifting Electric Submersible Pump (ESP) in oil wells. Reda itself is one brand of ESP is now owned by Schlumburger. In general, the construction of the ESP, any brand, consisting of filter, ... More

  • ADVANCED ELECTRICAL

    28 Agust 2013
    SCHEDULE     : 30 September - 3 October, 2013 VENUE            : Ibis Hotel – Yogyakarta / Golden Flower Hotel ( Bandung ) DURATION     : 4 days INTRODUCTION: Various challenges facing the industry today is not only related in terms of producing and marketing a product, to be able to maintain its production in accordance with the targets launched need to be supported by equipment ... More

  • ACHIEVEMENT MOTIVATION & TEAM WORK

    28 Agust 2013
    SCHEDULE     : 9 – 12 September , 2013 VENUE            : Ibis Hotel - Yogyakarta DURATION     : 4 days   OBJECTIVE Program pelatihan AMT (Achievement Motivation Training )  dan Team work menekankan pada  Potensi Kekuatan Pikiran manusia. . Pelatihan ini sangat efektif bagi perusahaan dan instansi dalam membangun motivasi & team building untuk peningkatan ... More

  • SUPERVISORY SKILLS

    28 Agust 2013
    SCHEDULE     : 30 Oktober – 2 November , 2013 VENUE            : Golden Flower Hotel – Bandung DURATION     : 4 days PENDAHULUAN Dalam Basic Supervisory diperkenalkan akan fungsi dan keterampilan dasar seorang supervisor. Dalam materi pelatihan advanced supervisory skills development ini akan dibahas lebih jauh model kepemimpinan yang tepat bagi anak buah, membangun mental ... More

  • LIFTING RIGGING OPERATIONS

    23 Agust 2013
    SCHEDULE     : 2 – 5 September, 2013 VENUE            : Jogjakarta Plaza Hotel, Yogyakarta DURATION   : 4 days DESCRPITION This course is designed to provide personnel with the knowledge to undertake lifting and rigging operations in an offshore environment.  This course is intended for: riggers, deck crew, construction, maintenance and mechanical technicians/supervisors and crane ... More

  • ETAP SOFTWARE

    15 Agust 2013
    SCHEDULE     :           19 – 22 Agustus 2013 VENUE           :           Ibis Hotel, Yogyakarta DURATION     :           4 days DESCRIPTION Pelatihan ini bertujuan meningkatkan pengetahuan dan wawasan mengenai analisa sistem tenaga. Untuk ... More

  • PRESSURE RELIEF VALVE

    31 Juli 2013
    SCHEDULE     : 27 - 30 Agustus ‘2013 VENUE            : Ibis Hotel, Yogyakarta DURATION   : 4 days PENGANTAR Pressure Relief Valve merupakan peralatan pada perpipaan yang digunakan untuk buka-tutup, perlindungan dan pengendalian. Tipe valve yang digunakan untuk buka tutup antara lain : Gate Valve, Butterfly Valve, Ball Valve. Swing check valve, ball check valve merupakan dua jenis valve ... More

  • IN HOUSE RISK MANAGEMENT IN SURFACE PRODUCTION FACILITIES (BATCH 1)

    31 Juli 2013
    SCHEDULE      : 16 - 19 September ‘2013 VENUE            : Blue Sky Hotel, Balikpapan DURATION      : 4 days   DESCRIPTION This course is designed to provide participants with a complete overview of Oil and Gas Production and to provide a comprehensive understanding of risk Management until evaluation to handle in production surface facilities . It will be delivered in order to meet the needs of ... More

  • GEOTHERMAL OPERATION FOR NON OPERATION PERSONNELS

    31 Juli 2013
    SCHEDULE       : 28 - 30 August ‘2013 VENUE              : Ibis Hotel, Yogyakarta DURATION      : 4 days DESCRIPTION This course aim to provide background knowledge on most aspects of geothermal energy system and technology, including characteristics and types of geothermal system, main components of hydrothermal system, types and characteristics of surface manifestations, ... More

  • Upcoming Event

  • Contact Us


    Office

     LPP Garden Hotel, Business Center, Jl. Laksda Adisucipto Km.6, Catur Tunggal, Depok, Sleman 55281, Yogyakarta Indonesia

     Jl. Imogiri timur km 2, Griya Wirokerten Pratama No D-12a, banguntapan, Bantul 55198 ,Yogyakarta Indonesia

    Phone

    +62 274 489185

    Fax

    +62 274 487470 / +62 274 484177

    Mobile

    +62 87 8383 9 8383

    Email

    solid_corporation@yahoo.com

    training@solidcorporation.net

    hera@solidcorporation.net

     Website

    www.solidcorporation.net