BASIC DRILLING HEALTH, SAFETY, & ENVIRONMENTAL

TUJUAN PELATIHAN

Setelah menyelesaikan kursus ini diharapkan peserta dapat :

1. Memahami prinsip-prinsip dasar dan berbagai perhitungan untuk pelaksanaan pemboran sumur-sumur minyak, gas dan reservoir panas bumi, pengembangan pelaksanaan perhitungan ini untuk meningkatkan kinerja pemboran sumur-sumur di lapangan.
2. Melakukan diagnosis dan mengerti penyelesaian dalam membuat suatu sumur minyak, gas atau panas bumi.
3. Membuat analisis terhadap data eksplorasi sumuran minyak, gas dan panas bumi , kemudian mampu melakukan perancangan global pemboran kinerja dan merencanakan pengembangannya.
4. Melakukan perhitungan-perhitungan kuantitatif untuk perencanaan lumpur pemboran, semen, hidrolika, well control.
5. Mempergunakan pengetahuan dalam perancangan pemboran tegak, untuk keperluan perancangan pemboran sumur miring, sumur horizontal baik dengan teknologi overbalance maupun underbalance.
6. Pengetahuan tentang Peraturan Perundangan dalam K3L
7. 7.    K3L dalam Operasi Pemboran

MATERI PELATIHAN

1. 1.    Introduction : Rotary Drilling Operations
   1. Steps to drilling a well
   2. Types of rigs
   3. Rig Components
   4. Rig Systems
2. 2.    Rheology of Drilling and Completion Fluids
   1. Equations and Inflow Performance RelationshipFunctions of Drilling/Completion Fluids
   2. Fluid Types,
   3. Fluid Models
   4. Introduction to Rotary Viscometer
   5. Other Testing Equipment
   6. Objectives of Monitoring Fluids
3. 3.    Mud System
   1. General Equations and ConceptsDiagnostic tests
   2. Water based muds
   3. Oil based muds
   4. Additives
   5. Mud handling system
4. 4.    Cementing
   1. Tubing Design Functions of cement
   2. Cement Types
   3. Cement Additives
5. 5.    Oil Field Tubulars and Hydraulics
   1. Drill string
   2. Casing and tubing
   3. Casing classification
   4. Stresses on casing
   5. Casing setting depth
   6. Burst and collapse calculations
   7. Wellheads
6. 6.    Drilling System – Pressure Loss Calculations
   1. Hydrostatics
   2. Buoyancy
   3. Flow through pipes and annuli
   4. Flow path
   5. Pressure loss calculations
7. 7.    Drilling System – Bit & Nozzles
   1. Hydrostatics Bit Types
   2. Bit Parts
   3. Bit Classification
   4. Bit Nozzles
8. 8.    Introduction to Well Control
   1. Hydrostatics Definitions
   2. Causes of kicks
   3. Kick indicators
   4. Shut-in procedure
   5. Well Kill Procedures
9. 9.    Directional Drilling
   1. Reasons for directional wells
   2. Planning Trajectory
   3. Kick off Methods
   4. Survey Methods
   5. Survey Calculations
10. 10.  Health, Safety and Environmental Consideration in Drilling Operation
    1. Peraturan Perundangan tentang K3L
    2. Pengauh Gas Beracun pada Operasi Pemboran
    3. Pengaruh Gas Beracun Bagi Kesehatan
    4. H2S
    5. Gas Detection Equipments
    6. Noise level & exposure in Oil Gas Industry
    7. g.    Noise Mapping

PARTISIPANT

Operator/Senior Operator/Engineer/Non Engineer

INSTRUKTUR

Ir. Drs. St. Edi Purwaka, MT/Murono Haryanto, ST and Team

PRICE

Please call us